On Tue, 8 Apr 2003, Henning Meier-Geinitz wrote: > Is the scanner listed in /proc/bus/usb/devices? If not, something with > your kernel USB system is wrong (wrong driver?).
Yes, it's: # cat /proc/bus/usb/devices .. P: Vendor=03f0 ProdID=0801 Rev= 0.01 S: Manufacturer=hp S: Product=hp scanjet 7400c S: SerialNumber=SCN227S0199LZ C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 .. # mount ... none on /proc/bus/usb type usbdevfs (rw) > > If yes, does sane-find-scanner find the scanner? No. > If it's not found > even as root, you may not have libusb-0.1.6 or newer. When you build I have installed libusb-0.1.7 > sane, configure prints a line like this "Libs=-lusb ...". If the -lusb Yes, I have LIBS='-lusb -lnsl -lm -ljpeg' in my config.log regards -- Ondrej Koala Vacha
