Hi, On Thu, May 29, 2003 at 09:44:12PM +0200, Christoph Bier wrote: > [gt68xx] gt68xx_device_generic_req: command=0x70 > [gt68xx] >> 70 01 00 00 00 00 00 00 70 01 00 00 00 00 00 00 70 01 00 00 00 00 > 00 00 70 01 00 00 00 00 00 00 70 01 00 00 00 00 00 00 70 01 00 00 00 00 00 00 > 70 01 00 00 00 00 00 00 70 01 00 00 00 00 00 00 > [gt68xx] gt68xx_device_generic_req: reading response failed: Error during > device I/O
This is ok, it just means that the firmware wasn't loaded. > [gt68xx] download_firmware: trying /usr/local/share/sane/gt68xx/PS2Dfw.usb > [gt68xx] firmware size: 7410 > [gt68xx] gt68xx_device_memory_write: dev=0x8065828, addr=0x0, size=0x40, > data=0x80748f0 > [gt68xx] gt68xx_device_memory_write: sanei_usb_control_msg failed: Error > during device I/O That's strange. Looks like the kernel didn't like the first error and now returns an error for the next command also. Try libusb instead of the kernel scanner driver: rmmod scanner mount -t usbfs /proc/bus/usb /proc/bus/usb If you use an UHCI host controller, try the module "uhci" instead of "ubs-uhci". Also, there is now sane-backend-1.0.12. I don't know if the backport is ready yet, but al least for sid it's there. Bye, Henning
