Hi John, Pull and plug the USB cable. That will reset the scanner. Try again to scan. If that doesn't work, Pull/plug the cable and start xsane with the device option (eg xsane umax:/dev/usbscanner0).
Hope that helps, Frank. On Mon, 25 Mar 2002, john manoogian III wrote: > On Sun, Mar 24, 2002 at 10:35:53PM -0500, li...@jm3.net wrote: > > > > i've been trying to get my umax 2200us working with usb [it worked well with > > scsi and sane in the past]. basically, sane 1.0.7 with the build33 patch is > ... > > the only thing i can think of is that my kernel version is too > > old (2.4.2). i am downloading 2.4.18 now, in hopes that it will work. > > okay, i upgraded to the 2.4.18 kernel. things are better, but not yet > functional. here's what happens now: i can run xsane, and preview, but not > scan. xsane prompts me to pick a scanner [dev/usbscanner0, /dev/usr/scanner0, > /dev/ usbscanner], so i pick the first one. xsane loads, i preview, the > preview > image looks swell. i hit 'start', the scanner acts like it's going to start, > then the light goes off (i think) and then nothing happens. > > i posted the results of running xsane (with debug=255) at: > > http://jm3.net/misc/sane-usb-problems/out > > (the erroneous part seems to be at the very end > > > [umax] do_calibration > > [umax] wait_scanner > > [umax] Sending SCSI cmd 0x00 cdb len 6, param len 0, result len 0 > > [umax] error in sanei_pv8630_bulkread (got 02) > > [umax] scanner reports Error during device I/O, waiting ... > > [umax] Sending SCSI cmd 0x00 cdb len 6, param len 0, result len 0 > ) > > could xsane thinking that i have 3 usb scanner devices be messing this up? > > jm3 / john manoogian III / j...@jm3.net / http://jm3.net > _______________________________________________ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel > -- Frank Zago - Gresham Enterprise Storage - www.greshamstorage.com
