On Sun, Mar 24, 2002 at 10:35:53PM -0500, li...@jm3.net wrote: > > i've been trying to get my umax 2200us working with usb [it worked well with > scsi and sane in the past]. basically, sane 1.0.7 with the build33 patch is ... > the only thing i can think of is that my kernel version is too > old (2.4.2). i am downloading 2.4.18 now, in hopes that it will work.
okay, i upgraded to the 2.4.18 kernel. things are better, but not yet functional. here's what happens now: i can run xsane, and preview, but not scan. xsane prompts me to pick a scanner [dev/usbscanner0, /dev/usr/scanner0, /dev/ usbscanner], so i pick the first one. xsane loads, i preview, the preview image looks swell. i hit 'start', the scanner acts like it's going to start, then the light goes off (i think) and then nothing happens. i posted the results of running xsane (with debug=255) at: http://jm3.net/misc/sane-usb-problems/out (the erroneous part seems to be at the very end > [umax] do_calibration > [umax] wait_scanner > [umax] Sending SCSI cmd 0x00 cdb len 6, param len 0, result len 0 > [umax] error in sanei_pv8630_bulkread (got 02) > [umax] scanner reports Error during device I/O, waiting ... > [umax] Sending SCSI cmd 0x00 cdb len 6, param len 0, result len 0 ) could xsane thinking that i have 3 usb scanner devices be messing this up? jm3 / john manoogian III / j...@jm3.net / http://jm3.net
