Hi Peter, Sorry, I meant the image is jogged. I posted two examples at http://pages.cpsc.ucalgary.ca/~hilldo/HP6300C/ The colour and grayscale show what it should be, and the (3) Lineart and (1) halftone show what it is producing.
Also on a side note, on a fresh boot of the system, running xsane results in 'no scanner detected', running xsane immediately again starts up xsane just fine. Is this normal?? Thanks, Doug --- Peter Kirchgessner <pe...@kirchgessner.net> wrote: > Hi Doug, > > what do you mean with "stepped" ? Is the scan head > moving > forward/backward or are these steps in the resulting > image ? > > --Peter > > Doug H wrote: > > > Hi folks, > > I just got around to testing my scanner with > sane > > 1.0.8 and xsane 0.86 and I have repeated a problem > I > > have had for a year or two and never bothered to > try > > and fix. > > Scanning in colour or greyscale works great, but > if > > I try to scan in lineart or halftone the image > gets > > stepped various amounts depending on the width of > the > > selected area. > > eg. Halftone at 600 dpi select area of < 3/4 in; > > image is fine, > 3/4in image is stepped > > Lineart at 600 dpi select area of < 2 in; > image > > is fine, > 2in image is stepped > > > > My system is 1200MHz Athlon, K7S5A MB, 256MB > > > > Mandrake Control Center says: > > Vendor: Advanced System Products, Inc > > Model: ABP940-U / ABP960-U > > Kernel Module: advansys > > Bus Type: PCI > > > > Doug > > > > __________________________________________________ > > Do You Yahoo!? > > LAUNCH - Your Yahoo! Music Experience > > http://launch.yahoo.com > > _______________________________________________ > > Sane-devel mailing list > > sane-de...@www.mostang.com > > http://www.mostang.com/mailman/listinfo/sane-devel > > > > > > > -- > Peter Kirchgessner > http://www.kirchgessner.net > mailto:pe...@kirchgessner.net > __________________________________________________ Do You Yahoo!? LAUNCH - Your Yahoo! Music Experience http://launch.yahoo.com
