rayman towalis wrote: > > hello everybody, > > my scanner is labled Mustek MFS-06000CX but the scsi-controller > detects him as a MFS-06000CZ. anyway, sane-find-scanner didnt > detects anything. please help me. [...] > SCSI subsystem driver Revision: 1.00 > PCI: Found IRQ 11 for device 00:11.0 > sym53c8xx: at PCI bus 0, device 17, function 0 > sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) > sym53c8xx: 53c875 detected > sym53c875-0: rev 0x3 on pci bus 0 device 17 function 0 irq 11 > sym53c875-0: ID 7, Fast-20, Parity Checking > scsi0 : sym53c8xx-1.7.3a-20010304 > Vendor: MUSTEK Model: MSF-06000CZ Rev: 4.00 > Type: Scanner ANSI SCSI revision: 00 > Vendor: TEAC Model: CD-ROM CD-532S Rev: 3.0A > Type: CD-ROM ANSI SCSI revision: 02 > Vendor: Traxdata Model: CDR4120 Rev: 5.0J > Type: CD-ROM ANSI SCSI revision: 02 > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0 > Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0 > sym53c875-0-<2,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 16) > sr0: scsi3-mmc drive: 68x/1x dvd-ram cd/rw xa/form2 cdda > Uniform CD-ROM driver Revision: 3.12 > sym53c875-0-<3,*>: FAST-10 SCSI 10.0 MB/s (100.0 ns, offset 15) > sr1: scsi-1 drive > Detected scsi generic sg0 at scsi0, channel 0, id 1, lun 0, type 6 [...] > [sanei_scsi] sanei_scsi_req_wait: SCSI command complained: Success > [sanei_scsi] sense buffer: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [sanei_scsi] target status: 7f host status: 0007 driver status: 0027 > [sanei_scsi] scsi_req_enter: entered 0x804df08 > [sanei_scsi] sanei_scsi.issue: 0x804df08 > [sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2 > [sanei_scsi] sanei_scsi_req_wait: waiting for 0x804df08 > [sanei_scsi] sanei_scsi.issue: 0x804df08 > [sanei_scsi] sanei_scsi_req_wait: read 64 bytes > [sanei_scsi] sanei_scsi_req_wait: SCSI command complained: Success > [sanei_scsi] sense buffer: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > [sanei_scsi] target status: 7f host status: 0007 driver status: 0027
Rayman, host statut = 7 and driver status = 027 indicate that something is going wrong inside the Linux SCSI system. host status 7 means some internal error within the SCSI drivers; driver status 0x27 means "suggest abort" and "hard error". My guess is that the sym53c875 driver causes the error -- but /var/log/messages might tell more details. Abel
