>>> do you see that request (that you do via saWeb) in the logfile? When it is successful ( when I use the FQDN instead of hostname ) the click "set maintenance" link appears to log 2 connection requests.
When I start SAWeb with http : //SAServer:4310/saweb then click the "set maintenance" link, nothing much shows in the log. I can see where I started SAWeb - at 7:48:01. I can see when I clicked "set maintenance" at 7:48:33 that it processed one connection request but the status did not change. ( the enable automatic web page update is set for 60 seconds ) Monday, July 6, 2015 7:47:59 AM PING DEBUG: event start for ID= 0 pingID= 6 Monday, July 6, 2015 7:47:59 AM RxS-VAULT Tower 03-1 failed due to a successrate of only 0% Monday, July 6, 2015 7:47:59 AM PING DEBUG: REMOVE for ID= 0 pingID= 6 Monday, July 6, 2015 7:47:59 AM PING DEBUG: REMOVED for ID= 0 pingID= 6 Monday, July 6, 2015 7:48:00 AM Web page generation ServersAliveRxStation Monday, July 6, 2015 7:48:01 AM Connection request on HTTP server (done by 172.16.40.16) Monday, July 6, 2015 7:48:33 AM Connection request on HTTP server (done by 172.16.40.16) Monday, July 6, 2015 7:49:00 AM Check cycle starts ( 25- 25) Monday, July 6, 2015 7:49:01 AM RxS-OB RmLock 09-1 Monday, July 6, 2015 7:49:01 AM PING DEBUG: event start for ID= 0 pingID= 29 Monday, July 6, 2015 7:49:01 AM RxS-OB RmLock 09-1 OK with a successrate of 100% and an average roundtriptime of 7ms Monday, July 6, 2015 7:49:01 AM PING DEBUG: REMOVE for ID= 0 pingID= 29 This is where I started SAWeb with FQDN http : //SAServer.famhs.org:4310/saweb Monday, July 6, 2015 7:58:34 AM RxS-AS RmLock 01-1 Monday, July 6, 2015 7:58:34 AM PING DEBUG: event start for ID= 4 pingID= 2 Monday, July 6, 2015 7:58:34 AM RxS-AS RmLock 01-1 OK with a successrate of 100% and an average roundtriptime of 0 ms Monday, July 6, 2015 7:58:34 AM PING DEBUG: REMOVE for ID= 4 pingID= 2 Monday, July 6, 2015 7:58:34 AM PING DEBUG: REMOVED for ID= 4 pingID= 2 Monday, July 6, 2015 7:58:34 AM Connection request on HTTP server (done by 172.16.40.16) Monday, July 6, 2015 7:58:35 AM RxS-RECOV RmLock 11-1 Monday, July 6, 2015 7:58:35 AM PING DEBUG: event start for ID= 5 pingID= 34 Monday, July 6, 2015 7:58:35 AM RxS-RECOV RmLock 11-1 OK with a successrate of 100% and an average roundtriptime of 4ms Monday, July 6, 2015 7:58:35 AM PING DEBUG: REMOVE for ID= 5 pingID= 34 Monday, July 6, 2015 7:58:35 AM PING DEBUG: REMOVED for ID= 5 pingID= 34 This is the last RxS-VAULT Tower 03-1 failure entry. Followed by the connection requests which successfully set maintenance on device "RxS-VAULT Tower 03-1". It appears that when it is successful, it logs two connection request lines. ( 7:59:12 ) Monday, July 6, 2015 7:58:38 AM RxS-VAULT Tower 03-1 failed due to a successrate of only 0% Monday, July 6, 2015 7:58:38 AM PING DEBUG: REMOVE for ID= 0 pingID= 6 Monday, July 6, 2015 7:58:38 AM PING DEBUG: REMOVED for ID= 0 pingID= 6 Monday, July 6, 2015 7:58:38 AM Web page generation ServerAlive724 Monday, July 6, 2015 7:58:38 AM Web page generation ServersAliveDigi Monday, July 6, 2015 7:58:38 AM Web page generation ServersAliveDiskspace Monday, July 6, 2015 7:58:38 AM Web page generation ServersAliveGeneral Monday, July 6, 2015 7:58:38 AM Web page generation ServersAliveRxStation Monday, July 6, 2015 7:59:12 AM Connection request on HTTP server (done by 172.16.40.16) Monday, July 6, 2015 7:59:12 AM Connection request on HTTP server (done by 172.16.40.16) Monday, July 6, 2015 7:59:39 AM Check cycle starts ( 34- 34) IT-Works on site @ Fort HealthCare [email protected] | Sr Sys Integration Architect | Fort HealthCare | O:920-568-5137 | C:414-861-7205 or 414-467-7543 | www.forthealthcare.com -----Original Message----- From: Servers Alive Discussion List [mailto:[email protected]] On Behalf Of dirk Sent: Sunday, July 05, 2015 11:20 AM To: Servers Alive Discussion List Subject: RE: [SA-list] SAWeb behavior If you enable logging in Sa, do you see that request (that you do via saWeb) in the logfile? dirk ________________________________ CONFIDENTIALITY NOTICE: The information transmitted above is intended solely for the person or entity to which it is addressed and may contain confidential and/or privileged information. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you have received this message in error, please contact the sender or the Information Systems Department at Fort HealthCare, (920) 568-5132. Thank you. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.
