If you enable logging in Sa, do you see that request (that you do via saWeb) in the logfile?
dirk -----Original Message----- From: Servers Alive Discussion List [mailto:[email protected]] On Behalf Of Turner, Peter Sent: Sunday, July 05, 2015 4:05 AM To: Servers Alive Discussion List Subject: RE: [SA-list] SAWeb behavior Thanks for the response The device is down. Just clicking the set maintenance link SAWeb in IE doesn't set it to maintenance mode. It will continue to show as down in a generated ( with a template ) web page. If I use properties for the link and retrieve the url it uses to set it to maintenance - http : //SAServer:4310/saweb?uid=3019&active=false and fire that with wget, it does set it to maintenance and it shows propery on the generated web page.. But I think I have figured out at least a workaround - if not the actual cause. I was using the hostname as shown in documentation. And the urls look like ...SAServer:4310... If I start SAWeb with SAServer.famhs.org ( my fqdn ) it works as I would expect. Not sure I quite understand why it doesn't work with short name but using fqdn is certainly not a hardship and would be the proper way to do it anyway. Thanks again. IT-Works on site @ Fort HealthCare [email protected] | Sr Sys Integration Architect | Fort HealthCare | O:920-568-5137 | C:414-861-7205 or 414-467-7543 | www.forthealthcare.com -----Original Message----- From: Servers Alive Discussion List [mailto:[email protected]] On Behalf Of dirk Sent: Saturday, July 04, 2015 10:30 AM To: Servers Alive Discussion List Subject: RE: [SA-list] SAWeb behavior How do you detect that the SET MAINTENANCE is not working? -----Original Message----- From: Servers Alive Discussion List [mailto:[email protected]] On Behalf Of Turner, Peter Sent: Saturday, July 04, 2015 4:40 PM To: Servers Alive Discussion List Subject: [SA-list] SAWeb behavior I am trying to get some remote client functionality going. (V 7.2.0.2638) I can run SAWeb but "set maintenance" doesn't operate. I don't think it is anything with SAWeb per se, because I can fire off a wget and switch an item to and from maintenance - just about has to be some 'save me from myself' feature of IE. wget -t 1 -T 1 "http://cp.mcafee.com/d/5fHCNEp6zqb3bBQSnC4PtPoV6WoUQsI8CNOdQNNEVujdzArFzzhO MCr78Tj76zBUsrm-vNWrsov45eRzcDrBPrJoP9SVsTtePEUQsLLZvAm7TDQTeLsKCOCPOoUs-YU_ ORQr8FGT7csG7DR8OJMddECQPt-jLuZXTLuVKVI06c20NYjfNiophLBd04irAwsPt5VHrjApYVTj Wuq8zpYGjb_6doQ1hyJkajH3-wSrpKqehNI5zihEwdboM85PVkCqnjh0c202-gd413OuCplyrjud JPaW Anybody else dealt with similar behavior? IT-Works on site @ Fort HealthCare [email protected] | Sr Sys Integration Architect | Fort HealthCare | O:920-568-5137 | C:414-861-7205 or 414-467-7543 | http://cp.mcafee.com/d/FZsSd3hJ5xBOWrbP2pKVIsztcsqem4joV6WoUQsL9CNOdQNNEVojd zArFzzhOYedHvfUZdKcfy2DqNCjJOVJSIpAXsKrKDpQsqenT-LOb3XPWrDnKnjpjpVcsevusvVqW dAkRrzCel3PWApmU6CQPqpK_9TLuZXTLsTsSkVSIpA_Q-peSN_BPpYGjb_6doQ1hyJkajH3-wSrp KqehNI5zihEwdboM85PVkCqnjh0c202-gd413OuCplyrjudNDmH ________________________________ CONFIDENTIALITY NOTICE: The information transmitted above is intended solely for the person or entity to which it is addressed and may contain confidential and/or privileged information. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited and may be unlawful. If you have received this message in error, please contact the sender or the Information Systems Department at Fort HealthCare, (920) 568-5132. Thank you. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.
