Does the SA logfile show an error when you do a test send? What protocol did you select for your SMS modem (gsm modem?)
From: Servers Alive Discussion List [mailto:[email protected]] On Behalf Of Laatz, Anthony Sent: Friday, January 07, 2011 8:26 AM To: Servers Alive Discussion List Subject: [SA-list] SMS Configuration help? So I recently purchased a SMS Modem and installed it on the computer where SA is. SA finds it and I am able to select it. I follow the documentation on which protocol and SMSC number to use, I have the proper COM port and Baud rate as I had to use these to activate the modem initially. I have tested the modem with the software that came with it to make sure I could send/receive SMS messages. However, I am unable to successfully send myself a test message via the SA application. Thank you, anthony Laatz Appletree Answering Services, Inc. Chicago, IL Office: 800.270.7030 | Fax: 866.827.8802 [email protected] (mailto:[email protected]) www.appletreeanswers.com (http://www.appletreeanswers.com/) (http://www.appletreeanswers.com/) (http://www.facebook.com/appletreeanswers) (http://www.twitter.com/appletreecall) (http://www.appletreeanswers.com/blog) To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.
