Sure
*config.log*:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by Sage configure 6.4.1, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure x make
## --------- ##
## Platform. ##
## --------- ##
hostname = iota
uname -m = x86_64
uname -r = 2.6.38.8
uname -s = Linux
uname -v = #7 SMP Sat Aug 2 23:41:34 CEST 2014
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: <MY_HOME>/sage-6.4.1/src/bin
PATH: <MY_HOME>/sage-6.4.1/local/bin
PATH: /var/sge6_2u5/bin/lx24-amd64
PATH: /usr/bin
PATH: /bin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/local/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2354: checking for a BSD-compatible install
configure:2422: result: /usr/bin/install -c
configure:2433: checking whether build environment is sane
configure:2488: result: yes
configure:2639: checking for a thread-safe mkdir -p
configure:2678: result: /bin/mkdir -p
configure:2685: checking for gawk
configure:2715: result: no
configure:2685: checking for mawk
configure:2701: found /bin/mawk
configure:2712: result: mawk
configure:2723: checking whether make sets $(MAKE)
configure:2745: result: yes
configure:2774: checking whether make supports nested variables
configure:2791: result: yes
configure:2919: checking whether to enable maintainer-specific portions of
Makefiles
configure:2928: result: yes
configure:2976: checking build system type
configure:2987: error: bash config/config.sub x failed
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_FCFLAGS_set=
ac_cv_env_FCFLAGS_value=
ac_cv_env_FC_set=
ac_cv_env_FC_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=x
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=x
ac_cv_env_target_alias_set=set
ac_cv_env_target_alias_value=x
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=mawk
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} <MY_HOME>/sage-6.4.1/config/missing aclocal-1.14'
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
AUTOCONF='${SHELL} <MY_HOME>/config/missing autoconf'
AUTOHEADER='${SHELL} <MY_HOME>/sage-6.4.1/config/missing autoheader'
AUTOMAKE='${SHELL} <MY_HOME>/sage-6.4.1/config/missing automake-1.14'
AWK='mawk'
CC=''
CCDEPMODE=''
CFLAGS=''
CPP=''
CPPFLAGS=''
CXX=''
CXXCPP=''
CXXDEPMODE=''
CXXFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
FC=''
FCFLAGS=''
GCC_VERSION=''
GREP=''
GXX_VERSION=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LDFLAGS=''
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} <MY_HOME>/sage-6.4.1/config/missing makeinfo'
MKDIR_P='/bin/mkdir -p'
OBJEXT=''
PACKAGE='sage'
PACKAGE_BUGREPORT='sage-de...@googlegroups.com'
PACKAGE_NAME='Sage'
PACKAGE_STRING='Sage 6.4.1'
PACKAGE_TARNAME='sage'
PACKAGE_URL=''
PACKAGE_VERSION='6.4.1'
PATH_SEPARATOR=':'
PERL=''
SET_MAKE=''
SHELL='bash'
STRIP=''
VERSION='6.4.1'
ac_ct_CC=''
ac_ct_CXX=''
ac_ct_FC=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE=''
am__include=''
am__isrc=''
am__leading_dot='.'
am__nodep=''
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build='x'
build_alias='x'
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
found_ar=''
found_dpkg=''
found_dpkg_arch=''
found_latex=''
found_m4=''
found_ranlib=''
found_strip=''
host='x'
host_alias='x'
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} <MY_HOME>/sage-6.4.1/config/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='NONE'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias='x'
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME "Sage"
#define PACKAGE_TARNAME "sage"
#define PACKAGE_VERSION "6.4.1"
#define PACKAGE_STRING "Sage 6.4.1"
#define PACKAGE_BUGREPORT "sage-de...@googlegroups.com"
#define PACKAGE_URL ""
#define PACKAGE "sage"
#define VERSION "6.4.1"
configure: exit 1
*install.log:*
*** ALL ENVIRONMENT VARIABLES BEFORE BUILD: ***
HISTFILE=<MY_HOME>/.history
HISTFILESIZE=1000
HISTSIZE=1000
HOME=<MY_HOME>
HOSTNAME=iota
JAVA_HOME=/usr/lib64/jvm/java
KRB5CCNAME=FILE:/tmp/krb5cc_704_Unsm60
LESSOPEN=|lesspipe.sh %s
LOGNAME=bogdan
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=33:so=01;35:bd=01;33:cd=01;33:or=01;05;37;41:mi=01;05;37;41:ex=32:*.sh=01;32:*.csh=01;32:*.bat=01;32:*.btm=01;32:*.cmd=01;32:*.com=01;32:*.exe=01;32:*.7z=01;31:*.7zip=01;31:*.arj=01;31:*.bz=01;31:*.bz2=01;31:*.cpio=01;31:*.deb=01;31:*.gz=01;31:*.img=01;31:*.lha=01;31:*.lzh=01;31:*.lzma=01;31:*.rar=01;31:*.rpm=01;31:*.tar=01;31:*.taz=01;31:*.tgz=01;31:*.tpz=01;31:*.trpm=01;31:*.tz=01;31:*.xz=01;31:*.z=01;31:*.Z=01;31:*.zip=01;31:*.zoo=01;31:*.bmp=01;35:*.cdr=01;35:*.gif=01;35:*.jpeg=01;35:*.jpg=01;35:*.JPG=01;35:*.mng=01;35:*.pbm=01;35:*.pcx=01;35:*.pgm=01;35:*.png=01;35:*.ppm=01;35:*.svg=01;35:*.tga=01;35:*.tif=01;35:*.tiff=01;35:*.xbm=01;35:*.xcf=01;35:*.xpm=01;35:*.asf=01;37:*.asx=01;37:*.au=01;37:*.avi=01;37:*.m1v=01;37:*.mid=01;37:*.mkv=01;37:*.mp3=01;37:*.mp4=01;37:*.mpg=01;37:*.mpe=01;37:*.mpeg=01;37:*.mod=01;37:*.mov=01;37:*.ogg=01;37:*.qt=01;37:*.rm=01;37:*.ram=01;37:*.s3m=01;37:*.vob=01;37:*.voc=01;37:*.wav=01;37:*.wma=01;37:*.wmv=01;37:*.xm=01;37:*.abw=36:*.bib=36:*.doc=36:*.dot=36:*.dvi=36:*.eps=36:*.info=36:*.kpr=36:*.me=36:*.ms=36:*.ods=36:*.odt=36:*.ps=36:*.pdf=36:*.pps=36:*.ppt=36:*.rtf=36:*.stw=36:*.sxc=36:*.sxw=36:*.tex=36:*.texi=36:*.texinfo=36:*.tm=36:*.txt=36:*.wri=36:*.xls=36:*.xlw=36:*.cgi=33:*.css=33:*.htm=33:*.html=33:*.php=33:*.phtml=33:*.ac=01;33:*.am=01;33:*.c=01;33:*.cc=01;33:*.cpp=01;33:*.diff=01;33:*.f=01;33:*.h=01;33:*.in=01;33:*.o=01;33:*.patch=01;33:*.po=01;33:*.pot=01;33:*.s=01;33:*.spec=01;33:
MAIL=/var/mail/bogdan
MAILCHECK=60
MAKE=make
MAKEFLAGS=
MAKELEVEL=1
MANPATH=/var/sge6_2u5/man:/usr/local/man:/usr/share/man:/usr/man:/usr/X11R6/man
MFLAGS=
PATH=<MY_HOME>/sage-6.4.1/src/bin:<MY_HOME>/sage-6.4.1/local/bin:/var/sge6_2u5/bin/lx24-amd64:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin
PWD=<MY_HOME>/sage-6.4.1/build
PYTHONPATH=<MY_HOME>/sage-6.4.1/local
SAGE_EXTCODE=<MY_HOME>/sage-6.4.1/local/share/sage/ext
SAGE_LOCAL=<MY_HOME>/sage-6.4.1/local
SAGE_LOGS=<MY_HOME>/sage-6.4.1/logs/pkgs
SAGE_PARALLEL_SPKG_BUILD=
SAGE_ROOT=<MY_HOME>/sage-6.4.1
SAGE_SPKG_INST=<MY_HOME>/sage-6.4.1/local/var/lib/sage/installed
SAGE_SRC=<MY_HOME>/sage-6.4.1/src
SAGE_VERSION=6.4.1
SGE_CELL=default
SGE_CLUSTER_NAME=p6444
SGE_EXECD_PORT=6445
SGE_QMASTER_PORT=6444
SGE_ROOT=/var/sge6_2u5
SHELL=/bin/bash
SHLVL=3
SSH_CLIENT=149.156.75.40 56445 22
SSH_CONNECTION=149.156.75.40 56445 149.156.75.100 22
SSH_TTY=/dev/pts/5
TERM=xterm
TMP=<MY_HOME>/tmp
TMPDIR=<MY_HOME>/tmp
USER=bogdan
_=/usr/bin/env
***********************************************
make[1]: Entering directory `<MY_HOME>/sage-6.4.1/build'
make[1]: Warning: File `Makefile' has modification time 1.5 s in the future
make base
make[2]: Entering directory `<MY_HOME>/sage-6.4.1/build'
make[2]: Warning: File `Makefile' has modification time 1.5 s in the future
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
configure: WARNING: you should use --build, --host, --target
configure: WARNING: you should use --build, --host, --target
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking build system type... Invalid configuration `x': machine `x' not
recognized
configure: error: bash config/config.sub x failed
If you would like to try to build Sage anyway (to help porting),
export the variable 'SAGE_PORT' to something non-empty.
make[2]: *** [<MY_HOME>/sage-6.4.1/local/var/lib/sage/installed/prereq]
Error 1
make[2]: Leaving directory `<MY_HOME>/sage-6.4.1/build'
make[1]: *** [all] Error 2
make[1]: Leaving directory `<MY_HOME>/sage-6.4.1/build'
real 0m1.641s
user 0m0.170s
sys 0m0.380s
***************************************************************
Error building Sage.
The following package(s) may have failed to build:
The build directory may contain configuration files and other potentially
helpful information. WARNING: if you now run 'make' again, the build
directory will, by default, be deleted. Set the environment variable
SAGE_KEEP_BUILT_SPKGS to 'yes' to prevent this.
Regards
Paweł
W dniu wtorek, 30 grudnia 2014 18:27:56 UTC+1 użytkownik Volker Braun
napisał:
>
> Can you post the full output and the config.log?
>
> On Tuesday, December 30, 2014 4:32:42 PM UTC+1, Paweł Bogdan wrote:
>>
>> Hi!
>>
>> I have access (but not admin privileges) to very strong computer. I'd
>> like to perform some calculations using sage. As I read, it is advised to
>> build sage to avoid some further errors, so I put the source zip, unpacked
>> it and tried to run 'make'. I've got (I think the whole output isn't
>> necessary):
>>
>> checking build system type... Invalid configuration `x': machine `x' not
>> recognized
>> configure: error: bash config/config.sub x failed
>> If you would like to try to build Sage anyway (to help porting),
>> export the variable 'SAGE_PORT' to something non-empty.
>>
>> I wasn't told what linux it is exactly - just it is 64-bit version.
>>
>> Do you have any suggestions what non-empty value should be provided?
>>
>> Best regards
>> Paweł Bogdan
>>
>
--
You received this message because you are subscribed to the Google Groups
"sage-support" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to sage-support+unsubscr...@googlegroups.com.
To post to this group, send email to sage-support@googlegroups.com.
Visit this group at http://groups.google.com/group/sage-support.
For more options, visit https://groups.google.com/d/optout.
