On Wed, Apr 16, 2008 at 11:21 AM, terry-s <[EMAIL PROTECTED]> wrote: > > ok, I've tried out the instructions. > > [1] On the desktop, the binary file downloaded and expanded ok, but I > get (different from before) error messages when I run ./sage > [screenful reproduced below]. >
That just means the binary is for a much older machine than yours. You can either try a different linux binary, or wait for a Mandriva binary. > [2] On the laptop, there is no longer enough room even to expand the > binary file, because of the 400MB debris left by the failed attempt to > compile from source. If I could only know what it has installed on to > the disk, I would like to remove it. (The failed compile attempt was > made in a branch directory off 'home'. The total extra disk > utilization after the compile attempt was about 800 MB more than at > the start. About 400MB of that was in the subdirectory where the > compile was done. I've now deleted that. But there remains an extra > 400MB somewhere unidentified. Any ideas on where to look would be > appreciated.) Sage is 100% local. It *does not* install any files anywhere else on your hard drive unless you type "make install", and even then the install only happens at the very end. In other words, just delete the directory where you tried to do the build, and it will be as if you had never done anything. Nice, eh? > > ------ > > [1a] Here are the error messages from trying to use the unpacked > binary. (At first run, there were some initial messages, reporting an > attempt to relocate some (? .py and .tpo ?) files. The screen > reproduced below is from > a subsequent attempt to run ./sage .) The linux setup already > includes the package 'libstdc++6-4.1.2-1mdv2007.1.i586' among others. > Any help would be appreciated. Terry > > begin quote========== > ---------------------------------------------------------------------- > | SAGE Version 2.11, Release Date: 2008-03-30 | > > | Type notebook() for the GUI, and license() for information. | > ---------------------------------------------------------------------- > --------------------------------------------------------------------------- > <type 'exceptions.ImportError'> Traceback (most recent call > last) > > /home/ts/sg/sage-2.11-debian32-athlon-i686-Linux/local/bin/<string> in > <module>() > > /home/ts/sg/sage-2.11-debian32-athlon-i686-Linux/local/lib/python2.5/ > > site-packages/sage/misc/preparser_ipython.py in <module>() > 6 > > [1;31m########################################################################### > [0m [1;33m [0m [0m > 7 [1;33m [0m [0m > ----> 8 [1;32mimport [0m [1;37msage [0m [1;33m. > [0m [1;37mmisc [0m [1;33m. [0m [1;37minterpreter [0m [1;33m [0m [0m > 9 [1;33m [0m [0m > 10 [1;32mimport [0m [1;37mpreparser [0m [1;33m [0m [0m > > /home/ts/sg/sage-2.11-debian32-athlon-i686-Linux/local/lib/python2.5/ > > site-packages/sage/misc/interpreter.py in <module>() > 102 [1;33m [0m [0m > 103 [1;32mimport [0m [1;37mos [0m [1;33m [0m [0m > --> 104 [1;32mimport [0m [1;37mlog [0m [1;33m [0m [0m > 105 [1;33m [0m [0m > 106 [1;32mimport [0m [1;37mremote_file [0m [1;33m [0m [0m > > /home/ts/sg/sage-2.11-debian32-athlon-i686-Linux/local/lib/python2.5/ > > site-packages/sage/misc/log.py in <module>() > 56 [1;33m [0m [0m > 57 [1;32mimport [0m [1;37minterpreter [0m [1;33m [0m [0m > ---> 58 [1;32mimport [0m [1;37mlatex [0m [1;33m [0m [0m > 59 [1;32mimport [0m [1;37mmisc [0m [1;33m [0m [0m > 60 [1;33m [0m [0m > > /home/ts/sg/sage-2.11-debian32-athlon-i686-Linux/local/lib/python2.5/ > > site-packages/sage/misc/latex.py in <module>() > 41 [1;32mimport [0m [1;37mrandom [0m [1;33m [0m [0m > 42 [1;33m [0m [0m > ---> 43 [1;32mfrom [0m [1;37mmisc [0m [1;32mimport [0m > [1;37mtmp_dir [0m [1;33m [0m [0m > 44 [1;32mimport [0m [1;37msage_eval [0m [1;33m [0m [0m > 45 [1;33m [0m [0m > > /home/ts/sg/sage-2.11-debian32-athlon-i686-Linux/local/lib/python2.5/ > > site-packages/sage/misc/misc.py in <module>() > 362 [1;32mreturn [0m [1;36m0 [0m [1;33m [0m [0m > 363 [1;33m [0m [0m > --> 364 [1;32mfrom [0m [1;37msage [0m [1;33m. > [0m [1;37mmisc [0m [1;33m. [0m [1;37mmisc_c [0m [1;32mimport [0m > [1;37mprod [0m [1;33m, [0m [1;37mrunning_total [0m [1;33m [0m [0m > 365 [1;33m [0m [0m > 366 [1;31m# alternative name for prod [0m [1;33m [0m [0m > > > <type 'exceptions.ImportError'>: /usr/lib/libstdc++.so.6: version > `GLIBCXX_3.4.9' not found (required by /home/ts/sg/sage-2.11-debian32- > athlon-i686-Linux/local/lib/libntl.so) > > WARNING: Failure executing code: 'import sage.misc.preparser_ipython; > sage.misc.preparser_ipython.magma_colon_equals=True' > --------------------------------------------------------------------------- > <type 'exceptions.ImportError'> Traceback (most recent call > last) > > /home/ts/sg/sage-2.11-debian32-athlon-i686-Linux/local/bin/<ipython > console> in <module>() > > /home/ts/sg/sage-2.11-debian32-athlon-i686-Linux/local/lib/python2.5/ > > site-packages/sage/misc/misc.py in <module>() > 362 return 0 > 363 > --> 364 from sage.misc.misc_c import prod, running_total > 365 > 366 # alternative name for prod > > > <type 'exceptions.ImportError'>: /usr/lib/libstdc++.so.6: version > `GLIBCXX_3.4.9' not found (required by /home/ts/sg/sage-2.11-debian32- > athlon-i686-Linux/local/lib/libntl.so) > > <ERROR: name 'sage_prompt' is not defined> > > end of quote ==== > > > > > > -- William Stein Associate Professor of Mathematics University of Washington http://wstein.org --~--~---------~--~----~------------~-------~--~----~ To post to this group, send email to sage-support@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/sage-support URLs: http://www.sagemath.org -~----------~----~----~----~------~----~------~--~---
