On Jun 26, 2010, at 12:04 AM, Dr. David Kirkby wrote:
Currently if a package fails to build in Sage, one gets a message
like:
============================
sage: An error occurred while installing pynac-0.2.0.p3
Please email sage-devel http://groups.google.com/group/sage-devel
explaining the problem and send the relevant part of
of /export/home/drkirkby/sage-4.5.alpha0/install.log. Describe your
computer, operating system, etc.
==========================
It would be quite easy to make that a bit more informatative, and
dump at least some basic information, like the output of 'uname -a'
and /etc/release (Solaris), /etc/issue (Linux).
That way, if someone posts their failed build, we already have some
information.
Yes. I would probably not provide quite as detailed report as below
though, simply for the fact that I think it will put people off from
sending so much information.
Alternatively, we could add "to report this bug upstream, please run
sage -XXX and/or email ..." where the above script emails/uploads the
relevant information. (That might be tricky depending on how much of
Sage we can depend on having built... Also, having contact information
via the reply address is nice.)
Then we change the above wording to
===============================================
sage: An error occurred while installing pynac-0.2.0.p3
Please email sage-devel http://groups.google.com/group/sage-devel
explaining the problem and preserving the rest of this error
message, which will aid the Sage developers to help you resolve the
problem.
SunOS hawk 5.11 snv_134 i86pc i386 i86pc
OpenSolaris Development snv_134 X86
Copyright 2010 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 01 March 2010
Memory size: 12279 Megabytes
7:56am up 19 day(s), 11:56, 2 users, load average: 0.07, 0.10,
0.11
Physical processors: 1
Cores: 4
Threads: 8
Processor speed: 3325 MHz
kthr memory page disk
faults cpu
r b w swap free re mf pi po fr de sr lf s0 s1 s2 in sy cs
us sy id
0 0 0 6042992 1462324 300 2344 0 0 0 0 4 0 0 8 16 9970 403608
1423 6 4 90
tty lofi1 sd0 sd1 sd2
cpu
tin tout kps tps serv kps tps serv kps tps serv kps tps serv us
sy wt id
0 737 0 0 3 3 0 0 152 8 4 1221 16 11
6 4 0 90
CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr
sys wt idl
0 270 0 1384 1991 145 197 2 7 6 0 28751 5
4 0 92
1 267 0 1081 1205 34 220 2 8 6 0 46942 5
4 0 91
2 286 0 1074 1566 43 165 2 6 5 0 51322 6
5 0 89
3 260 0 1540 1501 170 184 2 7 6 0 68906 7
7 0 86
4 356 0 746 1000 39 194 1 8 6 0 57084 6
5 0 89
5 322 0 495 923 26 150 1 6 5 0 47470 4
3 0 92
6 275 0 898 940 36 185 1 7 5 0 52295 6
5 0 89
7 308 0 612 842 32 128 1 6 5 0 50816 5
4 0 91
Using built-in specs.
Target: i386-pc-solaris2.11
Configured with: /export/home/drkirkby/gcc-4.4.4/configure --prefix=/
usr/local/gcc-4.4.4-multilib --enable-languages=c,c++,fortran --with-
gmp=/usr/local/gcc-4.4.4-multilib --with-mpfr=/usr/local/gcc-4.4.4-
multilib --disable-nls --enable-checking=release --enable-werror=no
--enable-multilib --with-system-zlib --enable-bootstrap --with-gnu-
as --with-as=/usr/local/binutils-2.20/bin/as --without-gnu-ld --with-
ld=/usr/ccs/bin/ld
Thread model: posix
gcc version 4.4.4 (GCC)
pool: bpool
state: ONLINE
scrub: scrub completed after 4h43m with 0 errors on Fri Jun 25
08:15:41 2010
config:
NAME STATE READ WRITE CKSUM
bpool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
c7t3d0 ONLINE 0 0 0
c7t4d0 ONLINE 0 0 0
errors: No known data errors
pool: rpool
state: ONLINE
scrub: scrub completed after 0h51m with 0 errors on Fri Jun 25
04:23:29 2010
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
c7t1d0s0 ONLINE 0 0 0
c7t2d0s0 ONLINE 0 0 0
errors: No known data errors
Filesystem size used avail capacity Mounted on
rpool/ROOT/opensolaris-8
457G 16G 392G 4% /
/devices 0K 0K 0K 0% /devices
/dev 0K 0K 0K 0% /dev
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 5.6G 372K 5.6G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/usr/lib/libc/libc_hwcap1.so.1
408G 16G 392G 4% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
swap 5.9G 273M 5.6G 5% /tmp
swap 5.6G 76K 5.6G 1% /var/run
bpool 1.8T 21K 982G 1% /bpool
bpool/chess 1.8T 200G 982G 17% /chess
bpool/downloads 1.8T 2.4G 982G 1% /downloads
rpool/export 457G 23K 392G 1% /export
rpool/export/home 457G 25G 392G 6% /export/home
bpool/users 1.8T 306G 982G 24% /export/home/
drkirkby
bpool/sage 1.8T 21K 982G 1% /export/home/
drkirkby/sage
bpool/jaap 1.8T 15G 982G 2% /export/home/jaap
bpool/madler 1.8T 27K 982G 1% /export/home/
madler
bpool/mvngu 1.8T 360M 982G 1% /export/home/mvngu
bpool/old-swan 1.8T 54G 982G 6% /old-swan
bpool/onair 1.8T 2.8G 982G 1% /onair
rpool 457G 86K 392G 1% /rpool
bpool/sage-downloads 1.8T 1.3G 982G 1% /sage-downloads
bpool/shared 1.8T 18G 982G 2% /shared
bpool/local 1.8T 9.8G 982G 1% /usr/local
bpool/virtual-machines
1.8T 100G 982G 10% /virtual-machines
bpool/zones 1.8T 26K 982G 1% /zones
df: cannot statvfs /zones/apache: Permission denied
bpool/writeable 1.8T 21K 982G 1% /writeable
df: cannot statvfs /zones/sage: Permission denied
df: cannot statvfs /zones/sage/root: Permission denied
================================================
--
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel+unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/sage-devel
URL: http://www.sagemath.org
--
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel+unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/sage-devel
URL: http://www.sagemath.org
