As I said: "Either deactivate the conda environment [...] or follow the instructions for conda [...]."
Which of the two do you pick? On Saturday, June 4, 2022 at 11:56:23 AM UTC-7 ijoll...@gmail.com wrote: > When running ./configure it says to conda activate ENVIRONMENT. I thought > due to this that sage built is dependent on conda for this reason. Clearly, > this doesn't seem to be the case, so how might I get pass this? > > On Saturday, 4 June 2022 at 19:31:35 UTC+1 Matthias Koeppe wrote: > >> With the config.log posted, it looks like you are trying to use homebrew >> together with conda. >> Either deactivate the conda environment and follow the instructions for >> homebrew, >> or follow the instructions for conda in the Sage installation manual. >> >> >> On Saturday, June 4, 2022 at 10:44:03 AM UTC-7 ijoll...@gmail.com wrote: >> >>> Very sorry, it still doesn't work. Please find the config.log file along >>> with this email. Would be very grateful if someone can please assist me. >>> Thank you! >>> >>> >>> On Friday, 3 June 2022 at 02:38:40 UTC+1 Matthias Koeppe wrote: >>> >>>> As I wrote before: "If the problem persists, please send the top-level >>>> config.log file" >>>> >>>> On Thursday, June 2, 2022 at 10:59:34 AM UTC-7 ijoll...@gmail.com >>>> wrote: >>>> >>>>> Unfortunately, this error continues to persist. My machine (M1 mac) is >>>>> not able to find ppl and Sage is not able to build it from source. The >>>>> error log suggests to write here so just making an attempt. It would be >>>>> lovely if some could please assist me with this. >>>>> >>>>> ``` >>>>> >>>>> [ppl-1.2.p1] C compiler: arm64-apple-darwin20.0.0-clang >>>>> [ppl-1.2.p1] C compiler version: >>>>> [ppl-1.2.p1] clang version 13.0.1 >>>>> [ppl-1.2.p1] Target: arm64-apple-darwin20.0.0 >>>>> [ppl-1.2.p1] Thread model: posix >>>>> [ppl-1.2.p1] InstalledDir: /Users/ishaanjolly/miniforge3/envs/ox/bin >>>>> [ppl-1.2.p1] **************************************************** >>>>> >>>>> [ppl-1.2.p1] Package 'ppl' is currently not installed >>>>> [ppl-1.2.p1] No legacy uninstaller found for 'ppl'; nothing to do >>>>> [ppl-1.2.p1] Configuring ppl-1.2.p1 >>>>> [ppl-1.2.p1] configure: WARNING: unrecognized options: >>>>> --disable-maintainer-mode >>>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>>> [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub >>>>> arm64-apple-darwin20.0.0 failed >>>>> >>>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>>> [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub >>>>> arm64-apple-darwin20.0.0 failed >>>>> [ppl-1.2.p1] >>>>> ******************************************************************************** >>>>> >>>>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file >>>>> [ppl-1.2.p1] >>>>> /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log >>>>> [ppl-1.2.p1] for details. >>>>> [ppl-1.2.p1] >>>>> ******************************************************************************** >>>>> >>>>> [ppl-1.2.p1] Error configuring PPL with both C and C++ interfaces, >>>>> trying >>>>> [ppl-1.2.p1] again with only the C++ interface. >>>>> [ppl-1.2.p1] Configuring ppl-1.2.p1 >>>>> [ppl-1.2.p1] configure: WARNING: unrecognized options: >>>>> --disable-maintainer-mode >>>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>>> [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub >>>>> arm64-apple-darwin20.0.0 failed >>>>> >>>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>>> [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub >>>>> arm64-apple-darwin20.0.0 failed >>>>> [ppl-1.2.p1] >>>>> ******************************************************************************** >>>>> >>>>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file >>>>> [ppl-1.2.p1] >>>>> /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log >>>>> [ppl-1.2.p1] for details. >>>>> [ppl-1.2.p1] >>>>> ******************************************************************************** >>>>> [ppl-1.2.p1] >>>>> [ppl-1.2.p1] real 0m1.068s >>>>> [ppl-1.2.p1] user 0m0.254s >>>>> [ppl-1.2.p1] sys 0m0.322s >>>>> >>>>> [ppl-1.2.p1] >>>>> ************************************************************************ >>>>> [ppl-1.2.p1] Error installing package ppl-1.2.p1 >>>>> [ppl-1.2.p1] >>>>> ************************************************************************ >>>>> [ppl-1.2.p1] Please email sage-devel ( >>>>> http://groups.google.com/group/sage-devel) >>>>> [ppl-1.2.p1] explaining the problem and including the log files >>>>> [ppl-1.2.p1] /Users/ishaanjolly/sage/logs/pkgs/ppl-1.2.p1.log >>>>> [ppl-1.2.p1] and >>>>> [ppl-1.2.p1] /Users/ishaanjolly/sage/config.log >>>>> >>>>> [ppl-1.2.p1] Describe your computer, operating system, etc. >>>>> [ppl-1.2.p1] If you want to try to fix the problem yourself, *don't* >>>>> just cd to >>>>> [ppl-1.2.p1] >>>>> /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1 and type >>>>> 'make' >>>>> or whatever is appropriate. >>>>> >>>>> [ppl-1.2.p1] Instead, the following commands setup all environment >>>>> variables >>>>> [ppl-1.2.p1] correctly and load a subshell for you to debug the error: >>>>> [ppl-1.2.p1] (cd >>>>> '/Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1' && >>>>> '/Users/ishaanjolly/sage/sage' --buildsh) >>>>> >>>>> [ppl-1.2.p1] When you are done debugging, you can type "exit" to leave >>>>> the subshell. >>>>> [ppl-1.2.p1] >>>>> ************************************************************************ >>>>> make[4]: *** [ppl-SAGE_LOCAL-no-deps] Error 1 >>>>> make[3]: *** >>>>> [/Users/ishaanjolly/sage/local/var/lib/sage/installed/ppl-1.2.p1] Error 2 >>>>> >>>>> make[2]: *** [all-start] Error 2 >>>>> >>>>> real 0m3.750s >>>>> user 0m2.353s >>>>> sys 0m0.732s >>>>> >>>>> *************************************************************** >>>>> Error building Sage. >>>>> >>>>> The following package(s) may have failed to build (not necessarily >>>>> during this run of 'make all-start'): >>>>> >>>>> * package: ppl-1.2.p1 >>>>> last build time: 2 Jun 18:37 >>>>> log file: /Users/ishaanjolly/sage/logs/pkgs/ppl-1.2.p1.log >>>>> build directory: >>>>> /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1 >>>>> >>>>> >>>>> It is safe to delete any log files and build directories, but they >>>>> contain information that is helpful for debugging build problems. >>>>> WARNING: If you now run 'make' again, the build directory of the >>>>> same version of the package will, by default, be deleted. Set the >>>>> environment variable SAGE_KEEP_BUILT_SPKGS=yes to prevent this >>>>> >>>>> ``` >>>>> >>>>> Please see the attached ppl-1.2 p1.log file below. >>>>> >>>>> Thank you for your time! >>>>> >>>>> On Monday, 16 May 2022 at 19:13:53 UTC+1 Matthias Koeppe wrote: >>>>> >>>>>> Please take a look at the notes for the Apple Silicon platform at >>>>>> https://trac.sagemath.org/wiki/ReleaseTours/sage-9.6#Sources >>>>>> If the problem persists, please send the top-level config.log file >>>>>> >>>>>> On Saturday, May 14, 2022 at 1:14:12 PM UTC-7 ijoll...@gmail.com >>>>>> wrote: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> I am very new to Sage, and software development in particular. I >>>>>>> recently tried cloning the GitHub repo, and installing Sage from root. >>>>>>> However, on running make, I failed. I was wondering if some assitance >>>>>>> could >>>>>>> be provided. Here is the error message: >>>>>>> >>>>>>> [ppl-1.2.p1] Package 'ppl' is currently not installed >>>>>>> [ppl-1.2.p1] No legacy uninstaller found for 'ppl'; nothing to do >>>>>>> [ppl-1.2.p1] Configuring ppl-1.2.p1 >>>>>>> [ppl-1.2.p1] configure: WARNING: unrecognized options: >>>>>>> --disable-maintainer-mode >>>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>>>>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub >>>>>>> arm64-apple-darwin20.0.0 failed >>>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>>>>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub >>>>>>> arm64-apple-darwin20.0.0 failed >>>>>>> [ppl-1.2.p1] >>>>>>> ************************************************************************************* >>>>>>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file >>>>>>> [ppl-1.2.p1] >>>>>>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log >>>>>>> [ppl-1.2.p1] for details. >>>>>>> [ppl-1.2.p1] >>>>>>> ************************************************************************************* >>>>>>> [ppl-1.2.p1] Error configuring PPL with both C and C++ interfaces, >>>>>>> trying >>>>>>> [ppl-1.2.p1] again with only the C++ interface. >>>>>>> [ppl-1.2.p1] Configuring ppl-1.2.p1 >>>>>>> [ppl-1.2.p1] configure: WARNING: unrecognized options: >>>>>>> --disable-maintainer-mode >>>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>>>>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub >>>>>>> arm64-apple-darwin20.0.0 failed >>>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>>>>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub >>>>>>> arm64-apple-darwin20.0.0 failed >>>>>>> [ppl-1.2.p1] >>>>>>> ************************************************************************************* >>>>>>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file >>>>>>> [ppl-1.2.p1] >>>>>>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log >>>>>>> [ppl-1.2.p1] for details. >>>>>>> [ppl-1.2.p1] >>>>>>> ************************************************************************************* >>>>>>> [ppl-1.2.p1] >>>>>>> [ppl-1.2.p1] real 0m1.080s >>>>>>> [ppl-1.2.p1] user 0m0.244s >>>>>>> [ppl-1.2.p1] sys 0m0.302s >>>>>>> [ppl-1.2.p1] >>>>>>> ************************************************************************ >>>>>>> [ppl-1.2.p1] Error installing package ppl-1.2.p1 >>>>>>> [ppl-1.2.p1] >>>>>>> ************************************************************************ >>>>>>> [ppl-1.2.p1] Please email sage-devel ( >>>>>>> http://groups.google.com/group/sage-devel) >>>>>>> [ppl-1.2.p1] explaining the problem and including the log files >>>>>>> [ppl-1.2.p1] >>>>>>> /Users/ishaanjolly/Programs/sage/logs/pkgs/ppl-1.2.p1.log >>>>>>> [ppl-1.2.p1] and >>>>>>> [ppl-1.2.p1] /Users/ishaanjolly/Programs/sage/config.log >>>>>>> [ppl-1.2.p1] Describe your computer, operating system, etc. >>>>>>> [ppl-1.2.p1] If you want to try to fix the problem yourself, *don't* >>>>>>> just cd to >>>>>>> [ppl-1.2.p1] >>>>>>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1 >>>>>>> and >>>>>>> type 'make' or whatever is appropriate. >>>>>>> [ppl-1.2.p1] Instead, the following commands setup all environment >>>>>>> variables >>>>>>> [ppl-1.2.p1] correctly and load a subshell for you to debug the >>>>>>> error: >>>>>>> [ppl-1.2.p1] (cd >>>>>>> '/Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1' >>>>>>> && >>>>>>> '/Users/ishaanjolly/Programs/sage/sage' --buildsh) >>>>>>> [ppl-1.2.p1] When you are done debugging, you can type "exit" to >>>>>>> leave the subshell. >>>>>>> [ppl-1.2.p1] >>>>>>> ************************************************************************ >>>>>>> make[4]: *** [ppl-SAGE_LOCAL-no-deps] Error 1 >>>>>>> make[3]: *** >>>>>>> [/Users/ishaanjolly/Programs/sage/local/var/lib/sage/installed/ppl-1.2.p1] >>>>>>> >>>>>>> Error 2 >>>>>>> make[2]: *** [all-start] Error 2 >>>>>>> >>>>>>> real 3m17.156s >>>>>>> user 2m26.222s >>>>>>> sys 0m18.146s >>>>>>> *************************************************************** >>>>>>> Error building Sage. >>>>>>> >>>>>>> The following package(s) may have failed to build (not necessarily >>>>>>> during this run of 'make all-start'): >>>>>>> >>>>>>> * package: ppl-1.2.p1 >>>>>>> last build time: 14 May 20:50 >>>>>>> log file: >>>>>>> /Users/ishaanjolly/Programs/sage/logs/pkgs/ppl-1.2.p1.log >>>>>>> build directory: >>>>>>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1 >>>>>>> >>>>>>> It is safe to delete any log files and build directories, but they >>>>>>> contain information that is helpful for debugging build problems. >>>>>>> WARNING: If you now run 'make' again, the build directory of the >>>>>>> same version of the package will, by default, be deleted. Set the >>>>>>> environment variable SAGE_KEEP_BUILT_SPKGS=yes to prevent this. >>>>>>> >>>>>>> make[1]: *** [all-start] Error 1 >>>>>>> make: *** [all] Error 2 >>>>>>> >>>>>>> And here is the log file: >>>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "sage-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to sage-devel+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/sage-devel/68171e2a-37ac-4e30-909d-e1b72bd8f7a3n%40googlegroups.com.
