When running ./configure it says to conda activate ENVIRONMENT. I thought due to this that sage built is dependent on conda for this reason. Clearly, this doesn't seem to be the case, so how might I get pass this?
On Saturday, 4 June 2022 at 19:31:35 UTC+1 Matthias Koeppe wrote: > With the config.log posted, it looks like you are trying to use homebrew > together with conda. > Either deactivate the conda environment and follow the instructions for > homebrew, > or follow the instructions for conda in the Sage installation manual. > > > On Saturday, June 4, 2022 at 10:44:03 AM UTC-7 ijoll...@gmail.com wrote: > >> Very sorry, it still doesn't work. Please find the config.log file along >> with this email. Would be very grateful if someone can please assist me. >> Thank you! >> >> >> On Friday, 3 June 2022 at 02:38:40 UTC+1 Matthias Koeppe wrote: >> >>> As I wrote before: "If the problem persists, please send the top-level >>> config.log file" >>> >>> On Thursday, June 2, 2022 at 10:59:34 AM UTC-7 ijoll...@gmail.com wrote: >>> >>>> Unfortunately, this error continues to persist. My machine (M1 mac) is >>>> not able to find ppl and Sage is not able to build it from source. The >>>> error log suggests to write here so just making an attempt. It would be >>>> lovely if some could please assist me with this. >>>> >>>> ``` >>>> >>>> [ppl-1.2.p1] C compiler: arm64-apple-darwin20.0.0-clang >>>> [ppl-1.2.p1] C compiler version: >>>> [ppl-1.2.p1] clang version 13.0.1 >>>> [ppl-1.2.p1] Target: arm64-apple-darwin20.0.0 >>>> [ppl-1.2.p1] Thread model: posix >>>> [ppl-1.2.p1] InstalledDir: /Users/ishaanjolly/miniforge3/envs/ox/bin >>>> [ppl-1.2.p1] **************************************************** >>>> >>>> [ppl-1.2.p1] Package 'ppl' is currently not installed >>>> [ppl-1.2.p1] No legacy uninstaller found for 'ppl'; nothing to do >>>> [ppl-1.2.p1] Configuring ppl-1.2.p1 >>>> [ppl-1.2.p1] configure: WARNING: unrecognized options: >>>> --disable-maintainer-mode >>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>> [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub >>>> arm64-apple-darwin20.0.0 failed >>>> >>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>> [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub >>>> arm64-apple-darwin20.0.0 failed >>>> [ppl-1.2.p1] >>>> ******************************************************************************** >>>> >>>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file >>>> [ppl-1.2.p1] >>>> /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log >>>> [ppl-1.2.p1] for details. >>>> [ppl-1.2.p1] >>>> ******************************************************************************** >>>> >>>> [ppl-1.2.p1] Error configuring PPL with both C and C++ interfaces, >>>> trying >>>> [ppl-1.2.p1] again with only the C++ interface. >>>> [ppl-1.2.p1] Configuring ppl-1.2.p1 >>>> [ppl-1.2.p1] configure: WARNING: unrecognized options: >>>> --disable-maintainer-mode >>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>> [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub >>>> arm64-apple-darwin20.0.0 failed >>>> >>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>> [ppl-1.2.p1] configure: error: /opt/homebrew/bin/bash ./config.sub >>>> arm64-apple-darwin20.0.0 failed >>>> [ppl-1.2.p1] >>>> ******************************************************************************** >>>> >>>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file >>>> [ppl-1.2.p1] >>>> /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log >>>> [ppl-1.2.p1] for details. >>>> [ppl-1.2.p1] >>>> ******************************************************************************** >>>> [ppl-1.2.p1] >>>> [ppl-1.2.p1] real 0m1.068s >>>> [ppl-1.2.p1] user 0m0.254s >>>> [ppl-1.2.p1] sys 0m0.322s >>>> >>>> [ppl-1.2.p1] >>>> ************************************************************************ >>>> [ppl-1.2.p1] Error installing package ppl-1.2.p1 >>>> [ppl-1.2.p1] >>>> ************************************************************************ >>>> [ppl-1.2.p1] Please email sage-devel ( >>>> http://groups.google.com/group/sage-devel) >>>> [ppl-1.2.p1] explaining the problem and including the log files >>>> [ppl-1.2.p1] /Users/ishaanjolly/sage/logs/pkgs/ppl-1.2.p1.log >>>> [ppl-1.2.p1] and >>>> [ppl-1.2.p1] /Users/ishaanjolly/sage/config.log >>>> >>>> [ppl-1.2.p1] Describe your computer, operating system, etc. >>>> [ppl-1.2.p1] If you want to try to fix the problem yourself, *don't* >>>> just cd to >>>> [ppl-1.2.p1] >>>> /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1 and type >>>> 'make' >>>> or whatever is appropriate. >>>> >>>> [ppl-1.2.p1] Instead, the following commands setup all environment >>>> variables >>>> [ppl-1.2.p1] correctly and load a subshell for you to debug the error: >>>> [ppl-1.2.p1] (cd >>>> '/Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1' && >>>> '/Users/ishaanjolly/sage/sage' --buildsh) >>>> >>>> [ppl-1.2.p1] When you are done debugging, you can type "exit" to leave >>>> the subshell. >>>> [ppl-1.2.p1] >>>> ************************************************************************ >>>> make[4]: *** [ppl-SAGE_LOCAL-no-deps] Error 1 >>>> make[3]: *** >>>> [/Users/ishaanjolly/sage/local/var/lib/sage/installed/ppl-1.2.p1] Error 2 >>>> >>>> make[2]: *** [all-start] Error 2 >>>> >>>> real 0m3.750s >>>> user 0m2.353s >>>> sys 0m0.732s >>>> >>>> *************************************************************** >>>> Error building Sage. >>>> >>>> The following package(s) may have failed to build (not necessarily >>>> during this run of 'make all-start'): >>>> >>>> * package: ppl-1.2.p1 >>>> last build time: 2 Jun 18:37 >>>> log file: /Users/ishaanjolly/sage/logs/pkgs/ppl-1.2.p1.log >>>> build directory: >>>> /Users/ishaanjolly/sage/local/var/tmp/sage/build/ppl-1.2.p1 >>>> >>>> >>>> It is safe to delete any log files and build directories, but they >>>> contain information that is helpful for debugging build problems. >>>> WARNING: If you now run 'make' again, the build directory of the >>>> same version of the package will, by default, be deleted. Set the >>>> environment variable SAGE_KEEP_BUILT_SPKGS=yes to prevent this >>>> >>>> ``` >>>> >>>> Please see the attached ppl-1.2 p1.log file below. >>>> >>>> Thank you for your time! >>>> >>>> On Monday, 16 May 2022 at 19:13:53 UTC+1 Matthias Koeppe wrote: >>>> >>>>> Please take a look at the notes for the Apple Silicon platform at >>>>> https://trac.sagemath.org/wiki/ReleaseTours/sage-9.6#Sources >>>>> If the problem persists, please send the top-level config.log file >>>>> >>>>> On Saturday, May 14, 2022 at 1:14:12 PM UTC-7 ijoll...@gmail.com >>>>> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> I am very new to Sage, and software development in particular. I >>>>>> recently tried cloning the GitHub repo, and installing Sage from root. >>>>>> However, on running make, I failed. I was wondering if some assitance >>>>>> could >>>>>> be provided. Here is the error message: >>>>>> >>>>>> [ppl-1.2.p1] Package 'ppl' is currently not installed >>>>>> [ppl-1.2.p1] No legacy uninstaller found for 'ppl'; nothing to do >>>>>> [ppl-1.2.p1] Configuring ppl-1.2.p1 >>>>>> [ppl-1.2.p1] configure: WARNING: unrecognized options: >>>>>> --disable-maintainer-mode >>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>>>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub >>>>>> arm64-apple-darwin20.0.0 failed >>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>>>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub >>>>>> arm64-apple-darwin20.0.0 failed >>>>>> [ppl-1.2.p1] >>>>>> ************************************************************************************* >>>>>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file >>>>>> [ppl-1.2.p1] >>>>>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log >>>>>> [ppl-1.2.p1] for details. >>>>>> [ppl-1.2.p1] >>>>>> ************************************************************************************* >>>>>> [ppl-1.2.p1] Error configuring PPL with both C and C++ interfaces, >>>>>> trying >>>>>> [ppl-1.2.p1] again with only the C++ interface. >>>>>> [ppl-1.2.p1] Configuring ppl-1.2.p1 >>>>>> [ppl-1.2.p1] configure: WARNING: unrecognized options: >>>>>> --disable-maintainer-mode >>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>>>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub >>>>>> arm64-apple-darwin20.0.0 failed >>>>>> [ppl-1.2.p1] checking build system type... Invalid configuration >>>>>> `arm64-apple-darwin20.0.0': machine `arm64-apple' not recognized >>>>>> [ppl-1.2.p1] configure: error: /bin/bash ./config.sub >>>>>> arm64-apple-darwin20.0.0 failed >>>>>> [ppl-1.2.p1] >>>>>> ************************************************************************************* >>>>>> [ppl-1.2.p1] Error configuring ppl-1.2.p1 See the file >>>>>> [ppl-1.2.p1] >>>>>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1/src/config.log >>>>>> [ppl-1.2.p1] for details. >>>>>> [ppl-1.2.p1] >>>>>> ************************************************************************************* >>>>>> [ppl-1.2.p1] >>>>>> [ppl-1.2.p1] real 0m1.080s >>>>>> [ppl-1.2.p1] user 0m0.244s >>>>>> [ppl-1.2.p1] sys 0m0.302s >>>>>> [ppl-1.2.p1] >>>>>> ************************************************************************ >>>>>> [ppl-1.2.p1] Error installing package ppl-1.2.p1 >>>>>> [ppl-1.2.p1] >>>>>> ************************************************************************ >>>>>> [ppl-1.2.p1] Please email sage-devel ( >>>>>> http://groups.google.com/group/sage-devel) >>>>>> [ppl-1.2.p1] explaining the problem and including the log files >>>>>> [ppl-1.2.p1] >>>>>> /Users/ishaanjolly/Programs/sage/logs/pkgs/ppl-1.2.p1.log >>>>>> [ppl-1.2.p1] and >>>>>> [ppl-1.2.p1] /Users/ishaanjolly/Programs/sage/config.log >>>>>> [ppl-1.2.p1] Describe your computer, operating system, etc. >>>>>> [ppl-1.2.p1] If you want to try to fix the problem yourself, *don't* >>>>>> just cd to >>>>>> [ppl-1.2.p1] >>>>>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1 and >>>>>> type 'make' or whatever is appropriate. >>>>>> [ppl-1.2.p1] Instead, the following commands setup all environment >>>>>> variables >>>>>> [ppl-1.2.p1] correctly and load a subshell for you to debug the error: >>>>>> [ppl-1.2.p1] (cd >>>>>> '/Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1' >>>>>> && >>>>>> '/Users/ishaanjolly/Programs/sage/sage' --buildsh) >>>>>> [ppl-1.2.p1] When you are done debugging, you can type "exit" to >>>>>> leave the subshell. >>>>>> [ppl-1.2.p1] >>>>>> ************************************************************************ >>>>>> make[4]: *** [ppl-SAGE_LOCAL-no-deps] Error 1 >>>>>> make[3]: *** >>>>>> [/Users/ishaanjolly/Programs/sage/local/var/lib/sage/installed/ppl-1.2.p1] >>>>>> >>>>>> Error 2 >>>>>> make[2]: *** [all-start] Error 2 >>>>>> >>>>>> real 3m17.156s >>>>>> user 2m26.222s >>>>>> sys 0m18.146s >>>>>> *************************************************************** >>>>>> Error building Sage. >>>>>> >>>>>> The following package(s) may have failed to build (not necessarily >>>>>> during this run of 'make all-start'): >>>>>> >>>>>> * package: ppl-1.2.p1 >>>>>> last build time: 14 May 20:50 >>>>>> log file: >>>>>> /Users/ishaanjolly/Programs/sage/logs/pkgs/ppl-1.2.p1.log >>>>>> build directory: >>>>>> /Users/ishaanjolly/Programs/sage/local/var/tmp/sage/build/ppl-1.2.p1 >>>>>> >>>>>> It is safe to delete any log files and build directories, but they >>>>>> contain information that is helpful for debugging build problems. >>>>>> WARNING: If you now run 'make' again, the build directory of the >>>>>> same version of the package will, by default, be deleted. Set the >>>>>> environment variable SAGE_KEEP_BUILT_SPKGS=yes to prevent this. >>>>>> >>>>>> make[1]: *** [all-start] Error 1 >>>>>> make: *** [all] Error 2 >>>>>> >>>>>> And here is the log file: >>>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "sage-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to sage-devel+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/sage-devel/592427f0-d8bc-45a9-8021-9ea9e9ae2d41n%40googlegroups.com.
