Hi Sasha, 

> On Mar 6, 2025, at 8:41 AM, Alexander Vainshtein 
> <Alexander.Vainshtein=40rbbn....@dmarc.ietf.org> wrote:
> 
> Hi,
> I have a question regarding behavior of VRRP in the scenario when the same 
> VRID is used to provide protection to hosts on two different subnets.
>  Please consider the following situation:
>     • The same VRID (e.g., 1) is configured on two IP-capable interfaces 
> later referred to as IF-1 and IF-2in two routers
>     • Each of these interfaces is configured with two IP addresses (for the 
> same IP version)in two different subnets. E.g.:
>         • IF-1 is configured with IP-11 = 192.168.1.1/24 and IP-12 = 
> 192.168.2.1/24
>         • IF-2 is configured with IP-21=192.168.1.2 and IP-22 = 192.168.2.2
>     • VRRP group with VRID=1 is configured with virtual IP addresses as 
> following:
>         • VIP-1 = 192.168.1.1 (i.e., IF-1 is the owner of this VIP)
>         • VIP-2 = 192.168.2.2 (i.e., IF-2 is the owner of this VIP).
>  In the scenario above,  should one of these interfaces send VRRP 
> Advertisement messages with Priority set to 255?

Yes - in each case the owner should advertise the address with a priority of 
255. Also, if this is a practical question as opposed to hypothetical, why not 
use a VRID of 2 for VIP-2. For most implementations, this would definitely 
simplify things. 

Hope this helps,
Acee

>  Your feedback would be highly appreciated.
>  Regards,
> Sasha
>   Regards,
> Sasha
>  
> 
> Disclaimer
> This e-mail together with any attachments may contain information of Ribbon 
> Communications Inc. and its Affiliates that is confidential and/or 
> proprietary for the sole use of the intended recipient. Any review, 
> disclosure, reliance or distribution by others or forwarding without express 
> permission is strictly prohibited. If you are not the intended recipient, 
> please notify the sender immediately and then delete all copies, including 
> any attachments.
> _______________________________________________
> rtgwg mailing list -- rtgwg@ietf.org
> To unsubscribe send an email to rtgwg-le...@ietf.org


_______________________________________________
rtgwg mailing list -- rtgwg@ietf.org
To unsubscribe send an email to rtgwg-le...@ietf.org

Reply via email to