I've reviewed the TG77 and Matrix-1000 .rgd file and I noticed that
the default volume for both is set to 0, and the default breath
controller (CC2) is set to 0 as well. I would assume this leads to
silence unless changes are made.
Before I ship these, I'm going to change this so that the default
volume is 100, and the default breath controller (CC2) is 127. This is
usually how we set things up so that we are making sound immediately.
Do you see any problem with doing this?
Ted.
On 2/19/26 12:58 PM, Arne wrote:
Ok, here is the next RGD file I created:
http://www.linuxtech.net/files/Oberheim_Matrix-1000.rgd
This is not based on the one that was already present in Rosegarden as
that one seemed to have quite a few typos and it had all the patch names
in lower case which didn't match the offical patch list of the Matrix-1000.
So I used an INS file as a better starting point and I double-checked
all 1000 patch names one by one with the offical patch name list
correcting any typos.
Also I added the supported controllers and of course made it compatible
with the newly implemented bank switch method.
On Thu, 12 Feb 2026, Arne wrote:
Ok, now that Rosegarden supports the TG77 bank select method here is the
final version of the rgd file I made for the TG77 for inclusion in
Rosegarden:
http://www.linuxtech.net/files/Yamaha_TG77.rgd
Other rgd files will follow in the near future.
_______________________________________________
Rosegarden-user mailing list
[email protected] - use the link below to unsubscribe
https://lists.sourceforge.net/lists/listinfo/rosegarden-user
