Perfect. Then it's probably set up on channel 10 by default.
It's probably just the usual GM mapping, so the key mapping should be
the usual. Otherwise they would have included a key mapping in the manual.
Regardless, get some experience with GM mode, then play around with
panel mode and see if anything jumps out as looking wrong in rg. That's
the best test of your .rgd file.
Ted.
On 1/11/22 1:28 PM, Kevin Cole wrote:
Dunno enough about MIDI -- or this keyboard -- to know what channel 10
is, but the last entry in the Panel Voice table on page 42 of the
owner's manual is:
* Voice Number: 00
* MSB: 0
* LSB: 0
* Program Number: 99
* Voice: Drum Kit
* Number of Notes Used: 1
I had previously separated out Drum Kit, because, under the GM Voice
table on the next page, the list goes uses MSB, LSB, Program Number = 0,
0, 0 - 127 for Voice Numbers 001 to 128, but the last voice, Voice
Number 129, is at MSB, LSB, Program Number = 127, 0, 0, and is listed as
"Standard Kit" and is the only entry in the section with the heading
"Percussion Kit". So, it seemed like it would have needed to be in a
class all its own.
_______________________________________________
Rosegarden-user mailing list
[email protected] - use the link below to unsubscribe
https://lists.sourceforge.net/lists/listinfo/rosegarden-user
