Shay, The important part is to have a parallel beam analyzer (crystal, parallel plate collimator or equivalent). The analyzer will then define the 2-theta position, not the sample.
A more interesting question is regarding the intensities. Sample displacement will affect intensities in parallel beam geometry. The relationship depends on many factors, e.g. fixed or symmetric incident angle, surface roughness, sample transparency, flat plate or capillary, … Jeff Jeffrey Nicolich, Ph.D. | Principal Scientist GCP Applied Technologies 62 Whittemore Avenue | Cambridge, MA 02140 | T +1 617.498.3816 | [email protected]<mailto:[email protected]> THIS E-MAIL AND ANY ATTACHED FILES ARE CONFIDENTIAL AND MAY BE LEGALLY PRIVILEGED. If you are not the addressee, any disclosure, reproduction, copying, distribution, or use of this communication is strictly prohibited. If you have received this transmission in error please notify the sender immediately and then delete this e-mail. From: [email protected] [mailto:[email protected]] On Behalf Of Martin Vickers Sent: Thursday, February 02, 2017 1:21 PM To: Shay Tirosh Cc: [email protected] Subject: Re: 2-teta shift due to sample displacement in parallel beam Hi, Shay. The sample displacement / peak-position relationship is equivalent. Martin On 2 February 2017 at 15:14, Shay Tirosh <[email protected]<mailto:[email protected]>> wrote: Dear Rietvelders Does the 2-teta shift due to sample displacement in parallel beam is similar to Bragg Brentano mode? If not then what is the mathematical expression in parallel beam? Thanks Shay -- _________________________________________________ Dr. Shay Tirosh Institute for Nanotechnology & Advanced Materials Bar Ilan University Ramat Gan, 52900 Israel Phone: +972-(0)30-531-7320 Mobile: +972-(0)54-8834533<tel:+972%2054-883-4533> Email: [email protected]<mailto:[email protected]> _________________________________________________ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please do NOT attach files to the whole list <[email protected]<mailto:[email protected]>> Send commands to <[email protected]<mailto:[email protected]>> eg: HELP as the subject with no body text The Rietveld_L list archive is on http://www.mail-archive.com/[email protected]/ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Martin Vickers Dept. of Chemistry, UCL, 20, Gordon Street WC1H 0AJ 020 7679 5592 (or ex 25592)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Please do NOT attach files to the whole list <[email protected]> Send commands to <[email protected]> eg: HELP as the subject with no body text The Rietveld_L list archive is on http://www.mail-archive.com/[email protected]/ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
