Just a quick plug for a program called "chooch" which does a very nice job of calculating f' and f" from an edge scan, see: http://www.gwyndafevans.co.uk/chooch.html

For Fe/Cu then neutrons may help.

Cheers,

Jon


[...]
Each edge to be used is recorded, this allow to calculate using Kramers-Kroening relation the effective value of f' and f'' at the
[...]

Regards,
Jfrancois

Dear Franz,
The best thing to do is collect 2 patterns, one just below the Fe
absorption edge and one well above both absorption edges to get normal
scattering from both atoms.
If you manage to collect data a few eV below the actual Fe edge
(remember that the edge energy changes a bit with charge and
coordination environment so an energy scan to determine the edge
position is recommended to select the energy to use) that will increase
the contrast from 4 electrons (assuming CuII and FeIII) to ~8 or 9 electrons (~30% difference in scattering power, enough to refine
occupancies).
Collecting data at the Cu edge will just reduce the contrast between Fe
and Cu possibly making Cu weaker scatterer than Fe in some conditions.
The tricky part is to determine exactly the f' and f'' corrections (and
therefore the real change in scattering power) due to the energy change
of the absorption edge and the steep change in f' and f'' close to the
edge that makes small errors in energy (1eV error of selected energy
radiation) have a big effect on the correction . The closer you get to
the edge the larger the contrast but the higher the uncertainty in the
f' and f'' correction values.

Hope this helps.
Leo

Dr. Leopoldo Suescun
Argonne National Laboratory
Materials Science Division Bldg 223
9700 S. Cass Ave. Argonne IL 60439
Phone: 1 (630) 252-9760
Fax: 1 (630) 252-7777

----- Original Message -----
From: Franz Werner <[EMAIL PROTECTED]>
Date: Friday, November 16, 2007 10:44 pm
Subject: X-ray scattering contrast Fe/Cu

Dear Rietvelders
Does anyone know whether the scattering contrast of Fe and Cu is large enough to refine their occupancies from a single X-ray powder pattern or would multiple wavelength patterns help?

Thanks for your advice.

Regards
Franz Werner
--
Psssst! Schon vom neuen GMX MultiMessenger gehört?
Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger





Reply via email to