Hi Guy,
It appears that when you ran 'riak console', you already had an instance of
Riak running. That 'duplicate_name' message means that there is another node
registered with the same name.
Let's try this:
1. Shutdown all copies of Riak.
2. Configure the Riak app.config file with the desired IP configuration (not
the loopback)
3. Try starting riak using the 'riak console' command.
- Chris
--
Christopher Meiklejohn
Software Engineer
Basho Technologies, Inc.
On Tuesday, July 2, 2013 at 9:38 PM, Guy Morton wrote:
> root@usidentity02:~# sudo riak console
> Attempting to restart script through sudo -H -u riak
> Exec: /usr/lib/riak/erts-5.9.1/bin/erlexec -boot
> /usr/lib/riak/releases/1.3.2/riak -embedded -config /etc/riak/app.config -pa
> /usr/lib/riak/lib/basho-patches -args_file /etc/riak/vm.args -- console
> Root: /usr/lib/riak
> {error_logger,{{2013,7,2},{18,36,48}},"Protocol: ~p: register error:
> ~p~n",["inet_tcp",{{badmatch,{error,duplicate_name}},[{inet_tcp_dist,listen,1,[{file,"inet_tcp_dist.erl"},{line,70}]},{net_kernel,start_protos,4,[{file,"net_kernel.erl"},{line,1314}]},{net_kernel,start_protos,3,[{file,"net_kernel.erl"},{line,1307}]},{net_kernel,init_node,2,[{file,"net_kernel.erl"},{line,1197}]},{net_kernel,init,1,[{file,"net_kernel.erl"},{line,357}]},{gen_server,init_it,6,[{file,"gen_server.erl"},{line,304}]},{proc_lib,init_p_do_apply,3,[{file,"proc_lib.erl"},{line,227}]}]}]}
> {error_logger,{{2013,7,2},{18,36,48}},crash_report,[[{initial_call,{net_kernel,init,['Argument__1']}},{pid,<0.21.0>},{registered_name,[]},{error_info,{exit,{error,badarg},[{gen_server,init_it,6,[{file,"gen_server.erl"},{line,320}]},{proc_lib,init_p_do_apply,3,[{file,"proc_lib.erl"},{line,227}]}]}},{ancestors,[net_sup,kernel_sup,<0.10.0>]},{messages,[]},{links,[#Port<0.202>,<0.18.0>]},{dictionary,[{longnames,true}]},{trap_exit,true},{status,running},{heap_size,610},{stack_size,24},{reductions,512}],[]]}
> {error_logger,{{2013,7,2},{18,36,48}},supervisor_report,[{supervisor,{local,net_sup}},{errorContext,start_error},{reason,{'EXIT',nodistribution}},{offender,[{pid,undefined},{name,net_kernel},{mfargs,{net_kernel,start_link,[['riak@10.219.30.12
>
> (mailto:riak@10.219.30.12)',longnames]]}},{restart_type,permanent},{shutdown,2000},{child_type,worker}]}]}
> {error_logger,{{2013,7,2},{18,36,48}},supervisor_report,[{supervisor,{local,kernel_sup}},{errorContext,start_error},{reason,shutdown},{offender,[{pid,undefined},{name,net_sup},{mfargs,{erl_distribution,start_link,[]}},{restart_type,permanent},{shutdown,infinity},{child_type,supervisor}]}]}
> {error_logger,{{2013,7,2},{18,36,48}},std_info,[{application,kernel},{exited,{shutdown,{kernel,start,[normal,[]]}}},{type,permanent}]}
> {"Kernel pid
> terminated",application_controller,"{application_start_failure,kernel,{shutdown,{kernel,start,[normal,[]]}}}"}
>
>
>
>
> Crash dump was written to: /var/log/riak/erl_crash.dump
> Kernel pid terminated (application_controller)
> ({application_start_failure,kernel,{shutdown,{kernel,start,[normal,[]]}}})
> --
> Guy Morton
> Web Development Manager
> Brüel & Kjær EMS
>
> ________________________________________
> From: Christopher Meiklejohn [cmeiklej...@basho.com
> (mailto:cmeiklej...@basho.com)]
> Sent: Wednesday, 3 July 2013 11:35 AM
> To: Guy Morton
> Cc: Toby Corkindale; Sean Cribbs; riak-users
> Subject: Re: Riak-CS-Control
>
> Hi Guy,
>
> When you say nothing starts, can you provide the output of running something
> like 'riak console' so we can try to figure out what is happening?
>
> - Chris
>
> --
> Christopher Meiklejohn
> Software Engineer
> Basho Technologies, Inc.
>
>
>
> On Tuesday, July 2, 2013 at 9:32 PM, Guy Morton wrote:
>
> > The issue I have is, I think, network/IP config related.
> >
> > I am totally confused as to HOW each app should be configured.
> > Documentation (eg
> > http://docs.basho.com/riak/latest/cookbooks/Basic-Cluster-Setup/) says
> > configure everything with the IP of the machine the app is running on, but
> > when I do that nothing starts. The only way I can configure it to make it
> > start is using 127.0.0.1.
> >
> > I'm just trying to set up a single node that runs all the apps and is
> > accessible by another machine. It seems a simple use-case but the only
> > documentation I can find doesn't give me any way to make that happen.
> >
> > And it's frustrating, because when it fails it gives no useful pointers as
> > to why, and when it looks like it's sorta working, it still fails to work
> > properly and, again, gives no useful clues as to what's wrong or how to fix
> > it.
> >
> > Tearing my hair out here.
> >
> > --
> > Guy Morton
> > Web Development Manager
> > Brüel & Kjær EMS
> >
> >
> > ________________________________________
> > From: riak-users [riak-users-boun...@lists.basho.com
> > (mailto:riak-users-boun...@lists.basho.com)] on behalf of Toby Corkindale
> > [toby.corkind...@strategicdata.com.au
> > (mailto:toby.corkind...@strategicdata.com.au)]
> > Sent: Wednesday, 3 July 2013 10:51 AM
> > To: Sean Cribbs
> > Cc: riak-users
> > Subject: Re: Riak-CS-Control
> >
> > On 02/07/13 22:51, Sean Cribbs wrote:
> > > On Tue, Jul 2, 2013 at 5:34 AM, Toby Corkindale
> > > <toby.corkind...@strategicdata.com.au
> > > (mailto:toby.corkind...@strategicdata.com.au)
> > > <mailto:toby.corkind...@strategicdata.com.au>> wrote:
> > >
> > > Riak (and Riak CS and Stanchion) all assume some level of competence
> > > at Erlang. I found Riak was tricky to get running, but had picked up
> > > enough knowledge of Erlang's strange syntax and foibles from working
> > > with RabbitMQ.
> > >
> > >
> > > This assumption is EXACTLY why we publish our own binary packages. You
> > > don't need to know Erlang to run Riak, and haven't for years. When you
> > > become an advanced user, yes, it is helpful, but it is not strictly
> > > necessary. This is especially true of CS, and I'd much rather get the
> > > bottom of Guy's problem than quibble about how hard Riak is to use
> > > "because Erlang".
> >
> >
> >
> >
> >
> > Oh, no, I feel you've misunderstood me slightly. I'm not blaming all
> > difficulties upon Erlang - however the way Erlang is used does bring
> > some added complexities to the party that can and will confuse people.
> > In particular, using Erlang syntax for the configuration file, and
> > outputting errors in the same way.
> >
> > The configuration format *is* hard to understand, and it's easy to break
> > it while making what should be simple changes.
> >
> > Have a look at a typical error thrown by Riak or Riak CS -- it's an
> > extremely dense Erlang stack trace.
> >
> > Erlang's clustering requires open networking, or more advanced
> > configuration if using host firewall.
> >
> >
> > Don't misunderstand me -- I kinda like Erlang and have seen some great
> > open source products built upon it.
> >
> > > We are working on exactly these problems, but they are difficult to get
> > > right. Any suggestions on config syntaxes that work well for other
> > > products are appreciated. For now we're looking at a format that
> > > resembles sysctl.
> >
> >
> >
> >
> >
> > Another common one is the Apache-style, eg.
> > <Section>
> > <Subsection>
> > Key Value
> > </Subsection>
> > </Section>
> >
> >
> > -Toby
> >
> >
> > _______________________________________________
> > riak-users mailing list
> > riak-users@lists.basho.com (mailto:riak-users@lists.basho.com)
> > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
> >
> > This e-mail is confidential and may be read, copied and used only by the
> > intended recipient. If you have received it in error, please contact the
> > sender immediately by return e-mail. Please then delete the e-mail and do
> > not disclose its contents to any other person.
> >
> > _______________________________________________
> > riak-users mailing list
> > riak-users@lists.basho.com (mailto:riak-users@lists.basho.com)
> > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>
>
>
>
>
>
> This e-mail is confidential and may be read, copied and used only by the
> intended recipient. If you have received it in error, please contact the
> sender immediately by return e-mail. Please then delete the e-mail and do not
> disclose its contents to any other person.
_______________________________________________
riak-users mailing list
riak-users@lists.basho.com
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
