Hey,
'eaddrinuse' from your previous mail suggests that the address your binding to
is already in use. Maybe riak is already running? Or something else is bound to
the address?
Cheers
Russell
On 11 Dec 2012, at 19:06, Kevin Burton <rkevinbur...@charter.net> wrote:
> Any more information on this or something I can do to help diagnose my own
> problem?
>
> Again app.config looks like:
>
> app.config looks like:
> [
>
> %% Riak Client APIs config
>
> {riak_api, [
> %% pb_backlog is the maximum length to which the queue of pending
> %% connections may grow. If set, it must be an integer >= 0.
> %% By default the value is 5. If you anticipate a huge number of
> %% connections being initialised *simultaneously*, set this number
> %% higher.
> %% {pb_backlog, 64},
> %% pb_ip is the IP address that the Riak Protocol Buffers
> interface
> %% will bind to. If this is undefined, the interface will not
> run.
> {pb_ip, "10.79.110.52" },
> %% pb_port is the TCP port that the Riak Protocol Buffers
> interface
> %% will bind to
> {pb_port, 8089 }
> ]},
> %% Riak Core config
> {riak_core, [
> %% Default location of ringstate
> {ring_state_dir, "/var/lib/riak/ring"},
>
> %% Default ring creation size. Make sure it is a power of 2,
> %% e.g. 16, 32, 64, 128, 256, 512 etc
> %{ring_creation_size, 64},
>
> %% http is a list of IP addresses and TCP ports that the Riak
> %% HTTP interface will bind.
> {http, [ {"10.79.110.52", 8099 } ]},
>
> ifconfig looks like:
>
> eth0 Link encap:Ethernet HWaddr 00:15:5D:50:3B:27
> inet addr:10.79.110.52 Bcast:10.79.111.255 Mask:255.255.254.0
> inet6 addr: fe80::215:5dff:fe50:3b27/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:879 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1353 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:107098 (104.5 KiB) TX bytes:204947 (200.1 KiB)
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:656 errors:0 dropped:0 overruns:0 frame:0
> TX packets:656 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:38513 (37.6 KiB) TX bytes:38513 (37.6 KiB)
>
> Finally the error.log
>
> 2012-12-11 05:24:49.785 [error] <0.170.0> CRASH REPORT Process <0.170.0> with
> 0 neighbours exited with reason: eaddrinuse in gen_server:init_it/6 line 320
> 2012-12-11 14:11:31.723 [info] <0.7.0> Application lager started on node
> 'riak@10.79.110.52'
> 2012-12-11 14:11:31.904 [warning]
> <0.154.0>@riak_core_ring_manager:reload_ring:231 No ring file available.
> 2012-12-11 14:11:32.091 [error] <0.170.0> CRASH REPORT Process <0.170.0> with
> 0 neighbours exited with reason: eaddrinuse in gen_server:init_it/6 line 320
> 2012-12-11 16:31:34.125 [info] <0.7.0> Application lager started on node
> 'riak@10.79.110.52'
> 2012-12-11 16:31:34.415 [warning]
> <0.151.0>@riak_core_ring_manager:reload_ring:231 No ring file available.
> 2012-12-11 16:31:34.711 [error] <0.170.0> CRASH REPORT Process <0.170.0> with
> 0 neighbours exited with reason: eaddrinuse in gen_server:init_it/6 line 320
> 2012-12-11 17:57:02.388 [info] <0.7.0> Application lager started on node
> 'riak@10.79.110.52'
> 2012-12-11 17:57:02.648 [warning]
> <0.154.0>@riak_core_ring_manager:reload_ring:231 No ring file available.
> 2012-12-11 17:57:02.899 [error] <0.170.0> CRASH REPORT Process <0.170.0> with
> 0 neighbours exited with reason: eaddrinuse in gen_server:init_it/6 line 320
> _______________________________________________
> riak-users mailing list
> riak-users@lists.basho.com
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
_______________________________________________
riak-users mailing list
riak-users@lists.basho.com
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
