I moved on to the next step and from the "seed node" I execute 'sudo
riak-admin cluster join riak@10.79.110.52' and I get
Attempting to restart script through sudo -H -u riak
Node riak@10.79.110.52 is not reachable!
I can ping the node:
PING 10.79.110.52 (10.79.110.52) 56(84) bytes of data.
64 bytes from 10.79.110.52: icmp_seq=1 ttl=63 time=1.08 ms
64 bytes from 10.79.110.52: icmp_seq=2 ttl=63 time=1.77 ms
64 bytes from 10.79.110.52: icmp_seq=3 ttl=63 time=2.67 ms
64 bytes from 10.79.110.52: icmp_seq=4 ttl=63 time=0.663 ms
Any ideas what this problem is?
I went to node2 and could not start riak
The vm.args on the second node looks like:
## Name of the riak node
-name riak@10.79.110.52
ifconfig looks like:
eth0 Link encap:Ethernet HWaddr 00:15:5D:50:3B:27
inet addr:10.79.110.52 Bcast:10.79.111.255
Mask:255.255.254.0
inet6 addr: fe80::215:5dff:fe50:3b27/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:345671 errors:0 dropped:0 overruns:0 frame:0
TX packets:136590 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:480181840 (457.9 MiB) TX bytes:13833066 (13.1 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1555 errors:0 dropped:0 overruns:0 frame:0
TX packets:1555 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:90413 (88.2 KiB) TX bytes:90413 (88.2 KiB)
netstat -tln
Proto Recv-Q Send-Q Local Address Foreign Address
State
tcp 0 0 0.0.0.0:111 0.0.0.0:*
LISTEN
tcp 0 0 0.0.0.0:4369 0.0.0.0:*
LISTEN
tcp 0 0 0.0.0.0:46130 0.0.0.0:*
LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:*
LISTEN
tcp 0 0 127.0.0.1:631 0.0.0.0:*
LISTEN
tcp 0 0 127.0.0.1:25 0.0.0.0:*
LISTEN
tcp 0 0 10.79.110.52:16001 0.0.0.0:*
LISTEN
tcp 0 0 0.0.0.0:5672 0.0.0.0:*
LISTEN
tcp 0 0 :::38381 :::*
LISTEN
tcp 0 0 :::111 :::*
LISTEN
tcp 0 0 :::22 :::*
LISTEN
tcp 0 0 ::1:631 :::*
LISTEN
tcp 0 0 ::1:25 :::*
LISTEN
tcp 0 0 :::5672 :::*
LISTEN
app.config looks like:
[
%% Riak Client APIs config
{riak_api, [
%% pb_backlog is the maximum length to which the queue of
pending
%% connections may grow. If set, it must be an integer >=
0.
%% By default the value is 5. If you anticipate a huge
number of
%% connections being initialised *simultaneously*, set this
number
%% higher.
%% {pb_backlog, 64},
%% pb_ip is the IP address that the Riak Protocol Buffers
interface
%% will bind to. If this is undefined, the interface will
not run.
{pb_ip, "10.79.110.52" },
%% pb_port is the TCP port that the Riak Protocol Buffers
interface
%% will bind to
{pb_port, 8089 }
]},
%% Riak Core config
{riak_core, [
%% Default location of ringstate
{ring_state_dir, "/var/lib/riak/ring"},
%% Default ring creation size. Make sure it is a power
of 2,
%% e.g. 16, 32, 64, 128, 256, 512 etc
%{ring_creation_size, 64},
%% http is a list of IP addresses and TCP ports that the
Riak
%% HTTP interface will bind.
{http, [ {"10.79.110.52", 8099 } ]},
%% pb_ip is the IP address that the Riak Protocol Buffers
interface
%% will bind to. If this is undefined, the interface will
not run.
{pb_ip, "10.79.80.11" },
%% pb_port is the TCP port that the Riak Protocol Buffers
interface
%% will bind to
{pb_port, 8090 }
]},
Finally the error.log
2012-12-10 18:56:02.030 [error] <0.170.0> CRASH REPORT Process <0.170.0>
with 0 neighbours exited with reason: eaddrinuse in gen_server:ini
t_it/6 line 320
2012-12-10 18:56:50.745 [error] <0.165.0> CRASH REPORT Process <0.165.0>
with 0 neighbours exited with reason: eaddrinuse in gen_server:ini
t_it/6 line 320
2012-12-10 18:58:47.013 [error] <0.170.0> CRASH REPORT Process <0.170.0>
with 0 neighbours exited with reason: eaddrinuse in gen_server:ini
t_it/6 line 320
2012-12-10 20:29:02.745 [error] <0.170.0> CRASH REPORT Process <0.170.0>
with 0 neighbours exited with reason: eaddrinuse in gen_server:ini
t_it/6 line 320
2012-12-10 20:52:21.908 [error] <0.170.0> CRASH REPORT Process <0.170.0>
with 0 neighbours exited with reason: eaddrinuse in gen_server:ini
t_it/6 line 320
2012-12-10 20:53:53.694 [error] <0.170.0> CRASH REPORT Process <0.170.0>
with 0 neighbours exited with reason: eaddrinuse in gen_server:ini
t_it/6 line 320
_______________________________________________
riak-users mailing list
riak-users@lists.basho.com
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
