Your idea worked. Thank you. I was able to install riak using the github shell script mentioned in the doc on the second node. I had to do 'ssh azureuser@node2' from the node1. But I am still having a problem I tried to 'riak-admin cluster join riak@ <mailto:riak@%3cinternal.ip.of.node1> <internal.ip.of.node1>' from node1 and I get
Attempting to restart script through sudo -H -u riak Join failed. Try again in a few moments. From: Michael Johnson [mailto:m...@mediatemple.net] Sent: Saturday, December 08, 2012 6:09 PM To: Kevin Burton Subject: Re: Second of multi-node setup on Azure is invisible By functional, I simply mean that the vms are up and running, have internet connectivity, and you have a way to get onto the console or ssh into them. What you describe could work assuming the the public ip has some sort of load balancing in front of it. That is fine as long as you have a way to get connected to both boxes and you configure riake to utilize the private ip addresses. You will need to find out how to ssh into the second node which is going to depend on a lot of things specific to Windows Azure. Perhaps you can ssh into the public ip to get connected to node1 and then ssh from there to the private ip of node2? Until you can get to a command line on both nodes, you are not going to be able to go any further. If the way to do that is not evident, then you may need to contact support for Windows Azure to figure this out. As to why the instructions you linked to didn't work, I can only guess that either something has changed on the Windows Azure side of things or perhaps something went wrong on their side of things which isn't immediately evident. Or perhaps the instructions simply are wrong. I have no way confirm any of these things. Hopefully, either the person who wrote those instructions or someone else who has used them can chime in and provide some insight. On Sat, Dec 8, 2012 at 4:29 AM, Kevin Burton <rkevinbur...@charter.net> wrote: Again the public IPs are the same. The internal IPs are different. Is that the way it is supposed to be? On Dec 8, 2012, at 1:05 AM, Michael Johnson <m...@mediatemple.net> wrote: I just looked at the instructions and they do seem to step you through creating the virtual machines and clearly that didn't work for you. Maybe someone else on this list is familiar with that the Windows Azure setup, but if you figure out how to give the vms different ips, you should be good to go. On Dec 7, 2012 10:56 PM, "Michael Johnson" <m...@mediatemple.net> wrote: You say both nodes have the same ip address? If I am reading that right, this is your problem. There may be other issues as well, but the same ip on two machines is always a problem. Well, that's not entirely true, but in case of most things including riak, it is. The instructions assume that you have two functional machines to start with, but it sounds like this us not the case. On Dec 7, 2012 9:18 PM, "Kevin Burton" <rkevinbur...@charter.net> wrote: I tried to restart the VMs and when I log back in to node1 I get [azureuser@node1 ~]$ sudo riak-admin cluster join riak@ <mailto:riak@%3cip.of.first.node> <ip.of.first.node> Attempting to restart script through sudo -H -u riak sudo: unable to change directory to /var/lib/riak: No such file or directory sudo: unable to execute /bin/bash: No such file or directory From: Kevin Burton [mailto:rkevinbur...@charter.net] Sent: Friday, December 07, 2012 11:03 PM To: riak-users@lists.basho.com Subject: RE: Second of multi-node setup on Azure is invisible Also I get the following error when trying to join ('node1') to the cluster: [root@node1 ~]# riak-admin cluster join riak@ <mailto:riak@%3cip.of.first.node> <ip.of.first.node> Attempting to restart script through sudo -H -u riak Join failed. Try again in a few moments. From: Kevin Burton [mailto:rkevinbur...@charter.net] Sent: Friday, December 07, 2012 10:54 PM To: riak-users@lists.basho.com Subject: Second of multi-node setup on Azure is invisible I am trying to follow the instructions at http://docs.basho.com/riak/latest/tutorials/installation/Installing-on-Windo ws-Azure/. For now I am setting up two nodes. The first node works fine. But with the second node I am not able to specify a DNS name (since it is not stand alone). So effectively what I call 'node2' doesn't exist. It shows up in the portal but PuTTY opening to node2.cloudapp.net does not exist (at least I cannot connect). They both have the same public IP address. The instructions indicate that I should install riak on both machines: 1. On each node, once you've connected using the steps above: Execute: sudo su - curl -s https://raw.github.com/glickbot/riak_on_azure/master/azure_install_riak.sh | sh But since I cannot SSH to the second node I cannot do this. Am I missing something in the instructions? _______________________________________________ riak-users mailing list riak-users@lists.basho.com http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
_______________________________________________ riak-users mailing list riak-users@lists.basho.com http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
