Had a moment of clarity :-) * So, telnet failed. Double-checked firewall rules, I had set up the firewall to allow 192.168.0.0/24, but I needed it to be 192.168.1.0/24. Fun typo.
Checking further, even though I had not previously started Riak on these servers (at least, not to my knowledge?), riak-admin member_status was still showing the name as riak@127.0.0.1. So I issued a reip on each server, and then issued join on 2 of the nodes, all 3 are in the cluster now :-) Sorry for the trouble, thanks for the assistance! Cheers <http://www.loomlearning.com/> Jonathan Langevin Manager, Information Technology Loom Inc. Wilmington, NC: (910) 241-0433 - jlange...@loomlearning.com - www.loomlearning.com - Skype: intel352 * On Wed, Nov 9, 2011 at 10:00 AM, Jonathan Langevin < jlange...@loomlearning.com> wrote: > Verified ping from cli. In riak console, ping fails with pang response. > Epmd -names only returns the local instance. Haven't tested telnet yet, > will shortly. > > Join syntax is correct, says node isn't reachable. > On Nov 9, 2011 9:53 AM, "Rusty Klophaus" <ru...@basho.com> wrote: > >> Hi Jonathan, >> >> Can you verify that the machines otherwise see each other? (Can you ping >> or ssh between the three machines?) >> >> Can you verify that you can use telnet to connect to the different open >> ports from each machine? >> >> If so, can you double check your usage of `riak-admin join NODENAME`? How >> does it respond? >> >> Finally, can you run `riak attach` to attach to an Erlang shell on one of >> the nodes, and run *net_adm:ping('rdevX@192.168.1.Y').* for each of the >> three node names? >> >> Hopefully that tells us where things are failing. >> >> Best, >> Rusty >> >> >> On Wed, Nov 9, 2011 at 9:32 AM, Jonathan Langevin < >> jlange...@loomlearning.com> wrote: >> >>> I'm setting up a Riak cluster, I've configured 3 fresh nodes for this >>> cluster. >>> The node name per is unique (format of rdevX@192.168.1.Y), firewall is >>> configured to allow traffic on 8097:8099, 6000:7999, 4369 tcp, 4369 udp >>> >>> * >>> Each is configured with the same config aside from names & ips to bind >>> to. >>> >>> I've attempted a ping from riak console, comes back pang. >>> >>> Any suggestions? >>> >>> <http://www.loomlearning.com/> >>> Jonathan Langevin >>> Manager, Information Technology >>> Loom Inc. >>> Wilmington, NC: (910) 241-0433 - jlange...@loomlearning.com - >>> www.loomlearning.com - Skype: intel352 >>> * >>> >>> _______________________________________________ >>> riak-users mailing list >>> riak-users@lists.basho.com >>> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com >>> >>> >> >> >> -- >> Rusty Klophaus (@rustyio) >> *Basho Technologies, Inc.* >> www.basho.com >> >> >>
_______________________________________________ riak-users mailing list riak-users@lists.basho.com http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
