> Has anyone else ever sucessfully installed either 6.1 or 6.2 on a raid5
> system? And no, there are no hard disks in the system other than the
> ones in the raid.
Hi Wayne,
I don't run the particular RAID5 card that you are, but I ran into
problems similar to this one with ours. I think what your going to have to
do is get into the system some how (rescue disk perhaps?) and remake the
initrd ram disk for the kernel to have it load the correct updated Compaq
driver instead of the non functional one that its currently trying to
load.
If you can't get a rescue disk to work, you should be able to boot off
the RedHat cdrom and get into a rescue option there, at which point you
will have to insmod the new compaq driver (and any other drivers you need
to see the device) before you can mount the disks to begin recovery.
For a quick way to build an initrd ram disk, see the following URL:
http://www.europe.redhat.com/documentation/rhl6.1/ref-guide-en/s1-sysadmin-build-kernel.php3#S2-SYSADMIN-INITRD
Hope this helps..
Regards,
Joshua Hirsh
efni CONNECT
UNIX Systems Administration
[EMAIL PROTECTED]
Tel: (705) 474-3364 ext. 2557
Fax: (705) 472-9202
PGP KEY: http://users.efni.com/admin/pgp/
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
