Try the setup program:
http://cesdis.gsfc.nasa.gov/linux/diag/index.html
Edward Marczak wrote:
>
> I have a machine running RH 6.1 with an Intel Ethernet Express Pro 100 NIC.
> I try to force this card to run at 10Mbs, but it doesn't seem to work. I've
> tried 'insmod eepro100 options=0x40' with no success. The log and link
> light disagree. The log is shown below, but the link light on the hub still
> shows it connected at 100.
>
> I've checked the EEPro100 Mailing List archive on Tux with no results.
> Anybody have a clue on this one?
>
> This card works under Windows.
>
> Log after 'insmod eepro100 debug=6 options=0x40:
>
> Mar 18 12:09:36 localhost kernel: eepro100.c:v1.06 10/16/98 Donald Becker
> http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
> Mar 18 12:09:36 localhost kernel: Found Intel i82557 PCI Speedo at I/O
> 0x2400, IRQ 11.
> Mar 18 12:09:36 localhost kernel: PCI latency timer (CFLT) is 0x42.
> Mar 18 12:09:36 localhost kernel: eepro100.c:v1.06 10/16/98 Donald Becker
> http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
> Mar 18 12:09:36 localhost kernel: eth0: Invalid EEPROM checksum 0x60fe,
> check settings before activating this device!
> Mar 18 12:09:36 localhost kernel: eth0: Intel EtherExpress Pro 10/100 at
> 0x2400, 00:A4:00:80:D2:9C, IRQ 11.
> Mar 18 12:09:36 localhost kernel: Receiver lock-up bug exists -- enabling
> work-around.
> Mar 18 12:09:36 localhost kernel: Board assembly 800080-000, Physical
> connectors present:
> Mar 18 12:09:36 localhost kernel: Primary interface chip None PHY #0.
> Mar 18 12:09:36 localhost kernel: Forcing 10Mbs half-duplex operation.
> Mar 18 12:09:36 localhost kernel: General self-test: passed.
> Mar 18 12:09:36 localhost kernel: Serial sub-system self-test: passed.
> Mar 18 12:09:36 localhost kernel: Internal registers self-test: passed.
> Mar 18 12:09:36 localhost kernel: ROM checksum self-test: passed
> (0x04f4518b).
> Mar 18 12:09:36 localhost kernel: Receiver lock-up workaround activated.
> Mar 18 12:09:37 localhost network: Bringing up interface lo succeeded
> Mar 18 12:09:37 localhost network: Bringing up interface eth0 succeeded
>
> Thanks for any suggestions on this.
> --
> Ed Marczak
> [EMAIL PROTECTED]
>
> --
> To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
> as the Subject.
--
You've got to be the dumbest newbie I've ever seen.
You've got white out all over your screen.
(Wierd Al Yankovic - It's all about the Pentiums)
Samuel J. Flory <[EMAIL PROTECTED]>
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
