Hi Howie. 

I didn’t see that message. What does midnite say?

I’m also not scared of open loop.  
I have a lot of older legacy systems that are running open loop without issues. 

Another positive of open loop is never worrying about a SOC shut down due to 
out of calibration with actual volts. 

Maybe the AIO has both settings active so which ever hits cut off with turn the 
inverter off. The LUX is either % or volts. 

Fortress highly recommends getting to 100% weekly and strongly every 2 weeks. 
Because they are concerned about SOC/volt calibration. 

Jay









> On Dec 16, 2024, at 1:03 PM, Howie Michaelson via RE-wrenches 
> <re-wrenches@lists.re-wrenches.org> wrote:
> 
> 
> Hi,
> Has anyone had experience pairing the Midnite AIO with Fortress eFlex 
> batteries.  Sounds like closed loop is not good.  I'm wondering if anyone has 
> paired them in open loop.  I've got a client that installed the eFlex about a 
> year ago on an old Magnum, which recently went belly up.  I'd like to replace 
> the eFlex with a PowerFlo16, but he's reluctant to do so after having just 
> spent too much on the eFlex.hanks,
> Howie Michaelson
> Sun Catcher
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the 
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to