Hi All,

This will likely be an easy answer for this group.

I have a radian 4048 installation and am unable to get the programming
correct.  What i want it to do is sell to the grid when the batteries are
full, but draw from the batteries at night or during cloudy periods until
hitting a set SOC or voltage and bring in the grid at that point.  It
successfully sells as desired, but as soon as the PV goes away, it pulls
from the grid to satisfy house loads even with a full battery.  The only
operation mode that will sell is grid-tied, yes?

I know I'm probably missing something obvious...

Thanks for the help,
Kris

Shine On!

Kris Schmid
Legacy Solar, LLC
137 West 1st Avenue
Luck, WI 54853
www.legacysolar.com
715-653-4295
NABCEP Certified PV Installation Professional
Licensed Wisconsin Master Electrician
BSEE
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to