firmware might help this issue. Without knowing what revisions you have
now, and the fact that XW+ is really only a voltage based charger...
XWpro is voltage and Soc based and is really the best choice for this
combo. There will be some things you just can't do with XW+ and I'd say
if you are this far into a good installation, it may be best to leave it
alone. Sleep on it 😉 The battery was designed for XW and you won't have
all the issues that the Outbacks do with LFP. Good Luck!
Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail offgridso...@sti.net
text 209 813 0060
On 2023-07-21 2:50 pm, Mac Lewis via RE-wrenches wrote:
Hello Wrenches,
I just installed a set of Discover LFP on an older XW+ system. The
communication seems to work great and the battery via Xanbus
automatically updates the charge settings and inverter settings and the
battery is viewable on the Xanbus network.
For some reason, the auto gen start module won't allow me to drop the
start trigger below 40%. I am wondering if a firmware update will open
that range or if I need to replace the AGS. Any suggestions for me?
I'll update all firmware but if I can save a trip, that would be great.
Thanks!
--
Mac Lewis
"Yo solo sé que no sé nada." -Sócrates
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try
the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
