Hello Wrenches, I just installed a set of Discover LFP on an older XW+ system. The communication seems to work great and the battery via Xanbus automatically updates the charge settings and inverter settings and the battery is viewable on the Xanbus network.
For some reason, the auto gen start module won't allow me to drop the start trigger below 40%. I am wondering if a firmware update will open that range or if I need to replace the AGS. Any suggestions for me? I'll update all firmware but if I can save a trip, that would be great. Thanks! -- Mac Lewis *"Yo solo sé que no sé nada." -Sócrates*
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
