Re: [RE-wrenches] SolArk and Tigo compatibility

[Christopher Warfel via RE-wrenches]

Hi List, Tigo was hard to pin down on this issue and they told me to contact Sol-Ark. I did, and they called back and said the method I proposed was their recommended method.  So, I will reattach the drawing.  The one thing this does not do, is shut down the Critical Loads panel.  To do that would take three disconnects I think. One for the AC utility interconnection, one for the Tigo transmitter, and one for pin 11/12.  Thank you to everyone.  Have a peaceful Thanksgiving.  Chris

--
            Christopher Warfel
                     ENTECH Engineering, Inc.
PO Box 871, Block Island, RI 02807
                                401-466-8978
<http://entech-engineering.com>

Tigo Transmitter Powering.pdf
Description: Adobe PDF document

BEGIN:VCARD
VERSION:4.0
N:Warfel;Christopher;;;
TEL;VALUE=TEXT:401-447-5773 (c)
NOTE:Use the cell phone number for all communications.  Thank you.
URL:https://www.entech-engineering.com
END:VCARD

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org