Hi Nick and List, that was my problem exactly. Chris
On 11/16/2022 12:38 PM, Nick A Lucchese via RE-wrenches wrote:
All, I believe what Chris is referring to is something I was initially
confused on during a Solark install I was involved with last year.
Uncertain if the manual has changed but in the Solark 12k manual dated
April 2, 2021 on page 23 it has a line saying-
Note: Tigo Optimizers are compatible with the Sol-Ark 12k (Do not use
the built in 12v Power supply in the Sol-Ark user area to power the
Tigo Optimizer TX transmitter)
I too had to confirm with Sol-Ark to clarify these details. I’ve not
looked at any of their newer manuals to see if some of these notes
have changed.
Enjoy your day, Nick
On Nov 16, 2022, at 8:41 AM, Chris Sparadeo via RE-wrenches
<re-wrenches@lists.re-wrenches.org> wrote:
Hi Chris,
I echo Ronald’s experience. I wasn’t aware of any memo from Sol Ark
suggesting pins 15 and 16 should not be used for the Tigo RSS
Transmitter. The 12K and 15K manuals both refrence a 12vdc RSS
transmitter to achieve rapid shut down.
Best,
Chris
On Wed, Nov 16, 2022 at 11:21 AM Roland - RES via RE-wrenches
<re-wrenches@lists.re-wrenches.org> wrote:
Aloha Chris,
We have numerous Sol-Ark systems with Tigo TS4Fs where we have
the transmitter wired to the 12v supply of the inverter, with no
issues to date.
Sent from a IPhone, with touch screen keys on the fly. Please
excuse shortcuts and typos.
Roland Shackelford
NABCEP CERTIFIED PV INSTALLER
President
Renewable Energy Services (RES), Inc.
Mobile: _808-938-9239 <http://808-938-9239/>_
www.renewablenergy.com <http://www.renewablenergy.com/>
On Nov 16, 2022, at 4:33 AM, Christopher Warfel via RE-wrenches
<re-wrenches@lists.re-wrenches.org> wrote:
Hi, We are doing our first system with these two devices. The
inverter is SolArk 12P (mutimode) and the Tigo product for RS is
the TS4F. Tigo has me a little bit walking in circles.
I told them that SolArk says not to use the 12VDC RS output
terminals for connecting the transmitter. I gave them the
attached drawing which they ask for, which shows the transmitter
connected to a 120VAC/12VDC breaker which they supply. They
told me to wire the 120VAC source to the main service panel so
the array would shut down on loss of power. I told them that is
exactly NOTwhat I wanted to happen as that would stop the
battery charging when there is a loss of utility power. I said I
wanted the 120VAC source to be the back up loads panel. After
about a week of calls and emails, I got an email back saying to
use the SolArk 12VDC terminals for RS. I just emailed them a
screen shot of the SolArk manual that says not to do that.
At this point, I am asking anyone on the list to let me know how
they wired the transmitter successfully. Thank you for any
guidance, Chris Warfel
--
Christopher Warfel
ENTECH Engineering, Inc.
PO Box 871, Block Island, RI 02807
401-466-8978
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't
work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work,
try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
--
Chris Sparadeo
C_802-369-4458
H_802-728-3059
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try
the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here:http://re-wrenches.org
List Address:RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
--
Christopher Warfel
ENTECH Engineering, Inc.
PO Box 871, Block Island, RI 02807
401-466-8978
<http://entech-engineering.com>
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
