Hi Chris, Might sound simple, but I always start by verifying that the generator is NOT in Eco-mode and that it is correctly set to the desired voltage output (seems like in this case that would be 120/240VAC). If those check out, verify that the cord is properly made up and correctly seated in the unit. If all these things check out, monitor voltage and frequency for highs and lows. Cross reference with parameters set on inverter/charger.
Kindly, Chris On Mon, Jul 25, 2022 at 2:08 PM Chris Daum via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Hi folks, I’m trying to help a fellow with two Magnum Systems; one of them > will accept his Honda EG5000CL gen set, the other will not. > > After running for a bout 10~15 minutes the circuit breaker pops on the > BMK. He will be rebooting his BMK this evening in the first attempt at > getting his system back up. He has been powering this system with a > Predator 3500w Gen set, along with his solar array. > > The system will not accept the Honda. Any ideas of clues to check out? > > > > Sincerely, > > > > Chris Daum > > Oasis Montana Inc. > > 406-777-4321 > > www.oasismontana.com > > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > -- Chris Sparadeo C_802-369-4458 H_802-728-3059
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
