Are you sure the boxes don't have conversion kits inside. They send us IQ7s with dongles to adapt to previous generations. The comms are not an issue, however sometimes you need to request firmware updates to make things work I've found.
Jason Szumlanski Florida Solar Design Group On Wed, Apr 6, 2022, 6:24 PM Nathan J. Stumpff via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Hello Wrenches, > > We received IQ7 inverters from Enphase as RMA replacements for failed > legacy (M175 and M190) inverters. I understand the IQ7 PLC is line to line, > and the legacy INV PLC is line to neutral. Have any of you successfully > gotten a circuit with a mixture of IQ7 and legacy INV to communicate? > > This is a large project and shuffling old INV in order to make separate > circuits with only IQ7 and only legacy INV will be difficult and expensive. > It appears that Enphase is telling us we need to do that (is that correct > Nick S.?) but I am trying to see if any of you have successfully mixed on > the same circuit, and anything you may have had to do to make the > communication work. There are some older threads about installing ferrite > loops to reduce noise, but I haven't found anything specifically about > mixed circuits. > > Thanks, > -Nathan > _______________________________________________ > List sponsored by Redwood Alliance > > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
