It is 600vdc ! Do you want that in a PDP with your 48Vdc and 120/240vac? I do not believe it to be UL listed for 600vdc in there, and so you are breaking some pretty big rules here. I do not post much anymore here. Keep 600vdc out of the PDP and for Offgrid we always want high reliability. Just good design practice!
Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ [1] e-mail offgridso...@sti.net [2] text 209 813 0060 On Wed, 26 Jan 2022 10:04:49 -0800, William Miller wrote: Michael: This seems like a rather stunning oversight--offering a charge controller without any means to integrate it into the BOS built by the same manufacturer. Just now I laid a 600 VDC rated touch-safe fuse holder over a QOU breaker. The fuse holder is smaller than the breaker so it would fit in the PDP. The fuse holder would be a bit recessed which may look awkward and impede the opening of the fuse holder. I do know you can buy DIN rail of varying height. Maybe you could drill out the rivets on the DIN rail and replace a short section of it with high profile DIN Rail and make a somewhat elegant solution??? Good luck. William Miller Miller Solar 17395 Oak Road, Atascadero, CA 93422 805-438-5600 www.millersolar.com [3] CA Lic. 773985 FROM: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org [4]] ON BEHALF OF Michael Morningstar SENT: Tuesday, January 25, 2022 4:53 PM TO: RE-wrenches SUBJECT: Re: [RE-wrenches] High Voltage Breakers for Conext Mppt-80-600 Thanks guys, Just wanted to make sure I wasn't missing something. Curious that Schneider doesn't have higher voltage input breakers. On Jan 25, 2022, at 4:15 PM, Tump wrote: I use the SQD fused disco I mount this next to the CC and use the Flex cobra wire for the low DC voltage and the do have breakers for the context for that On Jan 25, 2022, at 7:04 PM, Tom Duffy wrote: Hi Mike No breakers I know of that fit the Conext boxes but you could use a MidNite Big Baby and a MidNite 600 volt breaker in it or even a touch safe 1000 volt fuse and holder they're DIN rail TOM DUFFY _SENIOR SOLAR DESIGN ENGINEER_ Supply chain crunches brought on by the pandemic and Omicron's toll on the workforce are causing shortages of goods. Most analysts agree that rising prices -- not just in the US, but also across the world -- are largely consequences of the Covid-19 crisis rather than policy errors by governments or central banks. Infectious waves have closed factories in Asian manufacturing hubs and caused chaos in transporting products to US markets, creating a spike in demand. Also Americans have cash to burn after two years of canceled vacations, closed restaurants and working from home, a major factor supercharging the price surge. MAIN TOLL FREE: 888-826-0939 DIRECT: 888-503-6772 INTERNATIONAL: 001-575-539-2111 PANAMA: 507-836-5588 X 122 FAX: 520-844-8442 __ CONFIDENTIALITY NOTICE: This electronic mail message and any attached files contain information intended for the exclusive use of the individual or entity to whom it is addressed and may contain information that is proprietary, privileged, confidential and/or exempt from disclosure under applicable law. THE INFORMATION CONTAINED IN THIS ELECTRONIC MAIL TRANSMISSION IS CONFIDENTIAL. If you are not the intended recipient, you are hereby notified that any viewing, copying, disclosure or distribution of this information is strictly prohibited and may be subject to legal restriction or sanction. Please notify the sender immediately by electronic mail of any unintended recipients and delete the original message without making any copies. FROM: RE-wrenches ON BEHALF OF Michael Morningstar SENT: Tuesday, January 25, 2022 1:02 PM TO: RE-wrenches SUBJECT: [RE-wrenches] High Voltage Breakers for Conext Mppt-80-600 Wrenches, Can anyone direct me to PV input breakers that are rated up to 600VDC that would work in a Conext Distribution Panel? From what I can tell, Schneider only offers breakers up to 160VDC. Thanks, Michael MICHAEL MORNINGSTAR _Morningstar Electric_ PO Box 1494 Mount Shasta, California 96067 530-921-0560 CSLB 949635 _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org [9] List Address: RE-wrenches@lists.re-wrenches.org [10] Change listserver email address ">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [11] There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ [12] http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org [13] List rules ">http://www.re-wrenches.org/etiquette.htm [14] Check out or update participant bios: http://www.members.re-wrenches.org [15] WWW.SWNL.NET [16] Solarwinds Northernlights _ _ _ SERVING MID COAST MAINE "> _ 207-832-7574 CL. 610-517-8401 _ _ __BLAIR "TUMP" MAY_ ******** MAINE'S CHARTER ******** NABCEP "Certified PV Installer" ******** MAINE'S CHARTER ******** Trace Xantrex "Certified" Dealer / Installer" _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org [17] List Address: RE-wrenches@lists.re-wrenches.org [18] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [19] There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ [20] http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org [21] List rules "> MICHAEL MORNINGSTAR _Morningstar Electric_ PO Box 1494 Mount Shasta, California 96067 530-921-0560 CSLB 949635 Links: ------ [1] http://members.sti.net/offgridsolar/ [2] mailto:offgridso...@sti.net [3] http://www.millersolar.com/ [4] mailto:re-wrenches-boun...@lists.re-wrenches.org [5] mailto:t...@swnl.net [6] mailto:t...@solar-biz.com [7] mailto:re-wrenches-boun...@lists.re-wrenches.org [8] mailto:re-wrenches@lists.re-wrenches.org [9] http://re-wrenches.org/ [10] mailto:RE-wrenches@lists.re-wrenches.org [11] http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [12] https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ [13] http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org [14] http://www.re-wrenches.org/etiquette.htm [15] http://www.members.re-wrenches.org/ [16] http://webmail.sti.net/blocked::http://www.swnl.net/%22%20%5Co%20%22blocked::http://www.swnl.net/ [17] http://re-wrenches.org [18] mailto:RE-wrenches@lists.re-wrenches.org [19] http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org [20] https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ [21] http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org [22] http://www.re-wrenches.org/etiquette.htm [23] http://www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
