Hi Jay, I have had an Instek PSH-3630A for at least 15 years. It's been a solid unit has dealt with a lot of 2V cell recoveries. I see that particular unit is discontinued, if I was to buy one again, I'd get the Instek PSW 80-40.5 which goes from 0-80V and 40A. Not low cost units - will set you back couple thousand.
Kevin -----Original Message----- From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> On Behalf Of Jay Sent: January-20-22 4:35 PM To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Subject: [RE-wrenches] 2v battery charger Hi all What recommendations do folks have for a 2v battery charger. It’s for 2v lead acid cells, preferably looking for something that’s adjustable to the specific battery chemistry. Higher amps also preferred as the 2v cells are usually pretty large. 10 amps would work but higher probably better I’ve looked around but haven’t found anything. Thanks Jay _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
