Hello we have a lot of PAE series magnum inverters out there. One client lately has been experiencing voltage drop and failure of PCBs in two of his household appliances. I know it’s common to have some dimming of the lights when a well pump or other large load kicks on, but has anyone ran across a solution to alleviate the problem or boost up the voltage / condition it, in any way ? I’m not sure if this just happens with low battery voltage, or always The inverter is located ~ 300 ft from the main electrical panel with #2/2/2/4 URD feeders to an outdoor disco, then 8 AWG copper to the mains panel. 4448 PAE with one string of 6CS21P Batteries.
Jeremy Rodriguez Solar Installation / Design Expert All Solar, Inc. 1453 M St Penrose Colorado Sent by Jeremy's iPhone. Sorry for typos and shorthand!
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
