They do, indeed, list them. I just placed an order and will let you know if it is actually in stock.
Thanks! On Wed, Oct 6, 2021, 11:08 AM Louis Woofenden <lo...@woofenden.net> wrote: > > Hi Jason, > > I haven't tried ordered through Enphase's store recently, but in the past > they have had those breakers available here: > https://store.enphase.com/storefront/en-us/enpower-breakers. They are > showing them in stock right now, but not sure if that's reality. > > A workaround I've tried is using BRH220 breakers (which are 22KAIC). At > least some of them have a fastener hole for the hold-down kit. I don't > think they are listed as allowable model numbers in the Enpower manual, > however, depending on how particular your inspectors are. > > Best, > > Louis Woofenden > > Net Zero Solar > Tucson, AZ > > Jason Szumlanski wrote on 10/6/21 4:08 AM: > > Enphase Encharge requires bolt down breakers for backfed battery circuits > in the Engage Smart Switch. All ampacities below 60A require the model > number with 'B' at the end to get the required fastener hole in the middle > of the 2-pole breaker. 60-80A BR breakers all have the hole already without > the 'B' designation. > > These seem to be hopelessly backordered under 60A. Does anyone have a > source? I noticed that Enphase has their own part numbers for these. Maybe > they have a stockpile of them somewhere. Any ideas? > > Jason Szumlanski > Florida Solar Design Group > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & > settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other:https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette:http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios:http://www.members.re-wrenches.org > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
