Hi Jason,

I haven't tried ordered through Enphase's store recently, but in the past they have had those breakers available here: https://store.enphase.com/storefront/en-us/enpower-breakers. They are showing them in stock right now, but not sure if that's reality.

A workaround I've tried is using BRH220 breakers (which are 22KAIC). At least some of them have a fastener hole for the hold-down kit. I don't think they are listed as allowable model numbers in the Enpower manual, however, depending on how particular your inspectors are.

Best,

Louis Woofenden

Net Zero Solar
Tucson, AZ

Jason Szumlanski wrote on 10/6/21 4:08 AM:
Enphase Encharge requires bolt down breakers for backfed battery circuits in the Engage Smart Switch. All ampacities below 60A require the model number with 'B' at the end to get the required fastener hole in the middle of the 2-pole breaker. 60-80A BR breakers all have the hole already without the 'B' designation.

These seem to be hopelessly backordered under 60A. Does anyone have a source? I noticed that Enphase has their own part numbers for these. Maybe they have a stockpile of them somewhere. Any ideas?

Jason Szumlanski
Florida Solar Design Group


_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org


_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to