Hi Jesse, The FM100 is not compatible with the original Mate or discontinued Mate3. The controller must be the Mate3s. Sounds like you have this covered, you should be good to go. If this is an older system the AFCI might give you some trouble. Technically you can disable, but that’s your call.
-Chris On Tue, Sep 7, 2021 at 3:40 PM Jesse Dahl <dahlso...@gmail.com> wrote: > Hi. > > We have a 24V bi-modal outback system that run the residential wiring labs > for the electrical program I teach. Long story short, the FM60 we are > currently using had an operator error and we need to get a new charge > controller. Can the FM100 Work “seamlessly” with an older outback systems? > Wire sizes and array sizes all work out according to the data sheets and > documents I’ve read. Is there any unforeseen issues with the MATE3 or > optics RE that would come up if we upgrade to the 100? The Higher array VOC > for the 100 will make the labs easier to set up, that’s why I’d like to get > the 100. > > Thanks, > > Jesse > > Sent from my iPhone > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > -- Chris Sparadeo C_802-369-4458 H_802-728-3059
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
