Hi. We have a 24V bi-modal outback system that run the residential wiring labs for the electrical program I teach. Long story short, the FM60 we are currently using had an operator error and we need to get a new charge controller. Can the FM100 Work “seamlessly” with an older outback systems? Wire sizes and array sizes all work out according to the data sheets and documents I’ve read. Is there any unforeseen issues with the MATE3 or optics RE that would come up if we upgrade to the 100? The Higher array VOC for the 100 will make the labs easier to set up, that’s why I’d like to get the 100.
Thanks, Jesse Sent from my iPhone _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
