It’s too bad that Lorentz has come and gone a few times. I do like the architecture with the electronics all at the surface. And that the old ones had a easy manual speed control.
The property has a sqflex in another well so I’ll just work on some options to get the flow as close as I can for The customer. Thanks everyone for all the advice and info Jay > On Jun 16, 2021, at 4:51 AM, John Blittersdorf <john.blittersd...@gmail.com> > wrote: > > > Jay, > Lorentz still has two people in texas. I can’t find an active dealer but > they do provide excellent tech support 24/7. I have to buy from a dealer but > the ones that I have called only get one if specified on a new well they are > drilling. They didn’t know much about them. > > John B > >> On Tue, Jun 15, 2021 at 5:34 PM jay <jay.pe...@gmail.com> wrote: >> Does anyone have or know where I can get the pump curves with voltages? >> >> I’m trying to limit flow by lowering the voltage, which I know works, but I >> can’t find the output vs voltage charts. >> >> And does anyone know if Lorentz is still active in the USA? >> The last time i checked their controller had the ability for flow/speed >> adjustment. >> >> Thanks >> >> jay >> >> peltz power >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
