I have been using this one for too many years. You need more than this Jay? https://www.pumpsok.com/sites/pumpsok/uploads/documents/water_systems/flexnew.pdf
My dealer stopped selling Lornetz and not sure why? Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ e-mail offgridso...@sti.net text 209 813 0060 On Tue, 15 Jun 2021 15:15:54 -0600, jay <jay.pe...@gmail.com> wrote: > Does anyone have or know where I can get the pump curves with voltages? > > I’m trying to limit flow by lowering the voltage, which I know works, but > I can’t find the output vs voltage charts. > > And does anyone know if Lorentz is still active in the USA? > The last time i checked their controller had the ability for flow/speed > adjustment. > > Thanks > > jay > > peltz power > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org