John; Have you tried a UV-setting cyanoacrylate? There are some available that cure into a pliable but very strong (and thick) clear layer. If you just have one J-box to do, a tube of "UV Wader Repair" from your local flyfishing shop might do the trick. It cures quickly in direct sunlight, or with a small UV flashlight.
Dan Fink Owner, Buckville Energy Consulting LLC IREC Certified Instructor for PV and Small Wind Installation NABCEP Certified PV System Inspector NABCEP PV Associate d <dan.f...@greendustrialtraining.com>anbo...@gmail.com 970-672-4342 On Sun, Jun 13, 2021 at 7:45 AM John Blittersdorf < john.blittersd...@gmail.com> wrote: > I have a customer with two TOP racks of 8 Astropower 140’s and one panel > has a j box that separated from the backing sheet but the wires are still > connected. I’ve tried several adhesives but they eventually give up. The > house was just sold and an inspector is coming To check out the house. > Owner is sure that this loose box will be found by the inspector and jinx > the sale. Anybody know of a super adhesive that will hold up? > > John Blittersdorf > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
