Wrenches, I'm getting ready to go outside the building and shoot
myself. AC Coupling is turned off. The XW+ inverters are selling to
each other. XW+'s are disconnected from the load and from generator
input. System is off grid. When I switch the ATS the inverters are
supposed to pick up the load. ~ 12 kW, maybe 18 worst case. They are
selling to each other and when I make the switch the lights flicker and
the inverters go off, then they try to go on, and go off, etc.
Sync cables are hooked up. 4 XW+ and 1 SCP on one xanbus network. No
gateway hooked up at this time. PV will be on it's own Xbus network.
Not planning on using the Gateway if I can help it.
Thanks for any light you can shed on this. Not sure why Schneider would
ever want their inverters to sell to each other especially with AC
Coupling OFF. Arrgh.
Greg Egan
Remote Power Inc.
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
