Off-gridders,
I'm looking for anyone who has experience powering a 2 HP
(or even a 1 1/2 HP) submersible 3-wire well pump with a OB FlexPower2
(30 KWhrs of L-ion battery at 48 volt). I'm mostly interested in just
starting the pump as I'm sure it would run it. The lift out of the well
is 110 feet plus it would be starting against 30 psi into an elevated
tank. I'm not concerned about flickering lights because of the elevated
storage tank the pump only runs once a day, whilst sunny.
Any experiences welcome.
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
