Fan replacement is easier than boards

Sent from my iPhone

On Feb 14, 2021, at 9:00 PM, John Blittersdorf <john.blittersd...@gmail.com> 
wrote:


Hi Ron,
    Yes it is field repairable. Just open up the inverter and the fan is in 
that outer housing.  When lifting the case up, remember the fan power wire 
needs by be unplugged as you lift the case as not to rip it off the circuit 
board it is attached to.  Then you will just turn the case over and remove the 
fan and replace with the new one.  Then carefully plug it back in before 
completing the replacement of the case.

If you haven’t opened one up before, the red and black round plastic spacers on 
the dc terminals are screwed off, the six small Phillips head screws removed 
from the exposed AC board, and the 8 screws holding the case to the inverter 
base removed and lift the case up part way until you can see the fan wire.

John Blittersdorf
CV Wind Service




On Sun, Feb 14, 2021 at 8:15 PM Ron Young 
<solarea...@solareagle.com<mailto:solarea...@solareagle.com>> wrote:
Hi Wrenches, I have a client with an Outback GVFX3524 inverter that has had a 
fan failure. I will check with Outback but thought I might get a head start 
here. Is this a field replaceable item? I know the boards are but not sure 
about the fan. Any info much appreciated, thanks.

Ron

_______________________________________________
List sponsored by Redwood Alliance

List Address: 
RE-wrenches@lists.re-wrenches.org<mailto:RE-wrenches@lists.re-wrenches.org>

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to