>From what I have seen most folks get into trouble with split phase because they are using too small of an inverter. For a home or larger I only use the big radians or an XW's.
Some do have problems because they are refitting an old 120vac power system to split phase and the load panel was never balanced at all. Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ e-mail offgridso...@sti.net text 209 813 0060 On Mon, 25 May 2020 14:08:03 -0700, Mark Frye <ma...@berkeleysolar.com> wrote: > Folks, > > Back again into the way back machine, I once installed a system with > multiply FX's stacked in a split-phase configuration. At the advice of > the engineer, I also installed an auto-transformer across the lines to > help balance the per-phase loads. > > With the current split-phase inverters (Outback, Schneider, Magnum) what > is the per-phase rating? Do any or all of them deliver 100% output > rating to a single phase? If not, what is the max percentage output is > allowed on a single phase? Do folks have to spend alot of time making > sure there split-phase loads are balanced? > > Thanks, > > Mark > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
