Folks,
Back again into the way back machine, I once installed a system with
multiply FX's stacked in a split-phase configuration. At the advice of
the engineer, I also installed an auto-transformer across the lines to
help balance the per-phase loads.
With the current split-phase inverters (Outback, Schneider, Magnum) what
is the per-phase rating? Do any or all of them deliver 100% output
rating to a single phase? If not, what is the max percentage output is
allowed on a single phase? Do folks have to spend alot of time making
sure there split-phase loads are balanced?
Thanks,
Mark
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
