Alan, It appears to me that everyone miss read your question. If your customer does not need a generator, then his solar charge controller needs to be able to be set up for the lithium battery voltage settings. So the inverter simply needs to be 48 volts and has nothing to do with charging battery. You could use any 48 volt inverter and use the MATE. The inverter would only provide LBCO to protect the battery. As far as a used VFX 3648 contact me off list.
John Blittersdorf On Sat, Mar 7, 2020 at 8:20 PM Sindelar Solar <al...@sindelarsolar.com> wrote: > Wrenches, > > I have a client who is looking at upgrading an older off grid system that > has an Outback VFX3524 inverter to 48Vnom in order to use a Blue Ion > LiFePo battery. I installed the VFX about ten years ago and it has worked > without any issues. The client has never had a generator and has enough > array to equalize his FLA batteries with array only, so has never had or > needed a Mate. If I upgrade to 48V with a new inverter, it will most likely > be an FXR3048. First question: Can I use an original Mate (rather than a > Mate3) to set up basic programming with a R series inverter, such as > charger and LBCO settings? Second: anyone have an older FX3048 or VFX3648 > for sale, if the answer to the first question is no? > > Thank you, > > Allan > -- > > *Allan Sindelar* > al...@sindelarsolar.com > NABCEP Certified PV Installation Professional > New Mexico EE98J Journeyman Electrician > Founder (Retired), Positive Energy, Inc. > *505 780-2738 cell* > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
